


The CS302 uses the same mechanism, the same screw terminals and the same 121 × 80 mm cut-out as the rest of the Australian range.
What changes is the face: a brushed aluminium plate instead of moulded plastic, so a metal finish can be specified without redrawing the electrical layout or ordering a different wall box.
The plate is built as a two way switch and works as a one way switch when only two terminals are used, which keeps one part number across a whole project.
Intermediate, double pole and 35A versions are assembled on the same plate, so a corridor run, a hot water circuit and a standard bedroom light can all carry the same face.
Brushed aluminium is not a colour, it is a direction. Every plate in a room has to be brushed the same way, or the wall reads as patchy under raking light even though the colour matches.
We cut all plates for one order from the same sheet and keep the grain running the same way on the finished face.
Three anodised finishes are held for stock, and the difference between silver white and silver grey is obvious once two plates sit side by side, so we ask for the finish per room rather than per order. Custom RAL matching is available through the OEM programme with an approved sample before production.
| Parameter | Details |
|---|---|
| Product | Australian standard 1 gang wall switch, brushed aluminium plate |
| Switching Function | 2 way (SPDT); usable as 1 way when only two terminals are wired |
| Rated Current | 10A / 16A standard; intermediate, double pole and 35A on the same plate |
| Rated Voltage | AC250V |
| Number of Gangs | 1 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS301 | 1 gang, 1 way, 10A |
| CS302 | 1 gang, 2 way, 10A |
| CS302/16A | 1 gang, 2 way, 16A |
| CS302DP | 1 gang, double pole, 10A |
| CS302/005 | 1 gang, intermediate, 10A |
Model numbers follow the Australian range: the last two digits carry the function, so 01 is one way, 02 is two way, 05 is intermediate and DP is double pole. Tell us the function and the gang count and we quote the matching number.
The full plate range is listed under the CS brushed aluminium series. If the wall is narrow rather than wide, the same switch is built on the vertical plate as CS302-V.
A one gang plate is the smallest thing on a wall and the first thing anyone touches. In a rendered or tiled interior, a moulded white plate interrupts the surface, while a brushed aluminium plate sits inside it.
That is the whole reason the CS302 exists: the same electrical part, a face that belongs in a higher specification room.
Nothing about the installation changes. The plate covers the same 121 × 80 mm opening, the mechanism clips in the same way, and the terminals take the same cable.
An electrician who has fitted the PC range fits this one without new instructions, and a distributor can stock one mechanism family across both finishes.
The plate is a single piece of brushed aluminium with the anodised colour layer under the surface, so a scuff on the face is less visible than a scratch through paint.
It is also the reason the finish has to be ordered per room: two anodising batches can sit a shade apart, and on a metal face a shade is visible.

One gang plates in metal finish turn up in three places: hotel and serviced apartment rooms, where the switch is beside the door at eye level and the guest sees it; display and retail interiors, where the wall is a finished surface; and high-end residential, where the client has already chosen metal tapware and door hardware.
In all three, the plate count per room is small and the appearance standard is high, which is the opposite of a volume housing job. That changes what matters: colour consistency between the plates in one room, and how the brushed grain reads under the room’s lighting, rather than price per unit.
The aluminium face is the part of this product that is hardest to source consistently, and it is almost never made by the same factory that moulds the plastic plates.
Plate houses anodise and brush the sheet; mechanism factories assemble the switch behind it. A supplier who controls only one of those two steps is dependent on the other for the part customers actually judge.
IGOTO runs the assembly and the testing in Yueqing and sources the anodised plate to a specification we control: alloy, brushing direction, colour tolerance and the laser marking area. That is why we can hold three finishes as stock items instead of quoting each order as a custom run.
Every CS302 is assembled and tested on our own lines in Yueqing: mechanism, terminals and plate fitted, function tested per gang, endurance sampled on the finished plate.
The anodised plate arrives to our specification and is inspected for colour and grain direction before it goes onto a mechanism, because a plate that is a shade out cannot be corrected after assembly.
For OEM work we handle plate colour to an approved sample, laser marking on the metal face, retail packaging and mixed gang counts in one carton.
A full metal range, one to six gang, sockets, dimmers and data plates, can be produced as one coordinated order so the finishes match across the range.
Ordering a metal plate is the same checklist as a plastic one, with one extra step at the front: settle the finish before anything else.
Custom anodised colours, laser marking and retail packaging built on the standard one gang platform, with SAA documents covering the certified range.
Factory-direct pricing with flexible MOQ and scheduled delivery for distributors stocking brushed aluminium plates alongside the PC range.
Dedicated account management, Australian technical datasheets and priority production for partners building a metal switch range.
OEM/ODM, wholesale pricing and distributor support, one enquiry gets you a factory-direct quotation for CS302, with a physical plate sample in your chosen finish before production. Price is quoted per order rather than listed, so tell us the finish, the function and the quantity; SAA documentation under AS/NZS 3112 is supplied with the order.
Contact Our Sales TeamYes, and more than a gloss plastic plate does. The hairline surface scatters light, so a finger mark shows as a local change in sheen rather than as a smudge, which is more obvious at an angle.
Matte black hides it best of the three finishes, silver white shows it least under bright light and most under low light.
In hotel work this is usually accepted because the plate is cleaned anyway; in a high-touch family kitchen it is worth a sample before you commit a whole floor.
The anodised layer sits under the brushed surface, so light handling marks polish out with a dry cloth, but a tool dragged across the face leaves a line that cannot be repaired.
The practical protection is the peel-off film we ship on the plate: it stays on until the room is finished, and it is the reason we ask installers not to remove it at first fix.
If a plate is damaged on site, replacing one plate is cheaper than replacing the room.
Because anodising is a chemical process and the colour is a tolerance, not an absolute. Two batches can sit a shade apart, and the effect is strongest when the plates face different directions relative to the window.
The fix is to order all plates for one room from one batch, which is why we ask for the room schedule rather than a total quantity, and to keep the brushed grain running the same way on every plate.
Yes. The mechanism, terminals, contact material and ratings are shared across the Australian plate range, so the only variable is the face.
That means one set of spares, one wiring method and one set of test documents for a project that mixes metal and plastic plates in different rooms, a common pattern where public areas get metal and back-of-house areas get PC.
|
High-Quality Material
|
The CS302/CS301/CS302DP features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS302/CS301/CS302DP switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS302/CS301/CS302DP switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS302/CS301/CS302DP guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
