


The horizontal four gang plate is the answer when a wall is wide enough for 121 mm but has no room above or below, beside a door frame, under a low bulkhead, above a benchtop. A vertical plate would not fit; four singles would not line up.
Hall, living, kitchen and balcony is four circuits and one switch position in a typical apartment. It is the configuration that most often forces a four gang plate, and it is where a metal finish is usually specified because the entry is the first surface a visitor sees.
Four mechanisms on one face means the brushed direction is read across the full plate width, so a batch with mixed grain is obvious immediately.
We cut every plate for an order from one sheet and brush in the fitted orientation, which is the only reliable way to keep a wall of four gang plates consistent.
Each gang is a separate two way mechanism at 10A, 250V, with back and side cable entry. Any gang can be built as intermediate or double pole, and the plate is assembled to the function mix rather than modified on site.
| Parameter | Details |
|---|---|
| Product | Australian standard 4 gang wall switch, brushed aluminium plate |
| Switching Function | 2 way (SPDT) per gang; individual gangs available as 1 way, intermediate or double pole |
| Rated Current | 10A per gang |
| Rated Voltage | AC250V |
| Number of Gangs | 4 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS307 | 4 gang, 1 way, 10A |
| CS308 | 4 gang, 2 way, 10A |
| CS308DP | 4 gang, double pole, 10A |
| CS308/005 | 4 gang, intermediate, 10A |
A four gang plate can carry a mix of functions, for example three two way gangs and one intermediate gang for a hallway light. The function mix is noted on the order and assembled as one part number.
All four gang variants sit in the CS series catalogue. On a wall where height is available instead of width, the four gang plate is also supplied vertically as CS308-V.
Four gang plates exist because walls do not always have height.
A door frame with a low head, a wall under a bulkhead, a kitchen splashback with a bench above it, in each case there is width for a 121 mm plate and nothing above or below it.
A vertical plate is the better long-term answer where height exists, but where it does not, this is the plate.
The CS308 carries four independent two way mechanisms at 10A, 250V on a brushed aluminium face. Terminals take back and side entry, the mechanism is shared with the rest of the Australian range, and any gang can be built as intermediate or double pole without changing the plate.
In metal the four gang plate has one weakness worth knowing: 121 mm of brushed face is a lot of reflective surface, and the mechanisms break it up into four segments.
If the spacing between gangs is uneven, which happens when plates are assembled from mixed batches, the eye reads it as a fault even though the colour matches.

On a 500 mm wide wall section, the choice is one four gang plate or two two gang plates stacked.
The four gang plate is cheaper to install and reads as a single fitting, but it puts all four switches at one height, which means the top of the plate, not the middle, is what a shorter user reaches for.
Two two gang plates let you set each at a different height, which matters where a wheelchair user or a child needs access to only some of the circuits. It costs a second cut-out and a second plate, and on a metal finish it costs the consistent grain across the wall.
A four gang aluminium plate is a stiff, flat, 121 mm long piece of metal. It will not follow a wavy wall.
If the box is set 3 mm proud, a plastic plate flexes and closes the gap; the aluminium plate sits on the high point and shows a shadow line along its length that a single gang plate would hide.
That makes the first fix more important than the plate. Set the boxes flush, check them with a straight edge across the wall, and do not rely on tightening the fixing screws to pull the plate down, that bows the face and the reflection shows it before the gap does.
A four gang plate with four different functions is the configuration most likely to be assembled wrong, because the mechanisms look identical and only the terminal arrangement differs. We build to a written function list per gang, test each gang independently after assembly, then test the plate as a unit before packing.
The plate itself is inspected for colour and grain direction before it goes onto the mechanisms. For OEM orders we mark the face by laser, pack to your retail specification and can supply mixed gang counts in one carton so a project ships as one consignment.
Four gang orders are decided by two numbers: the wall width and the gang count. Get both right and the rest is finish.
Custom anodised colours, laser marking and retail packaging on the four gang platform, with SAA documents for the certified range.
Factory-direct pricing and flexible MOQ for distributors supplying apartment and medium-density projects.
Account management, Australian datasheets and priority production for partners building a coordinated metal range.
Send the wall width, the gang count and the function of each gang, and we confirm whether the horizontal or vertical plate is the right fit before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with every shipment.
Contact Our Sales TeamOnly if the three single boxes were mounted in a row with the correct spacing, which is unusual. A four gang plate needs a single box or a correctly spaced multi-gang box for the 121 x 80 mm format.
In most retrofits the wall has to be opened and the box replaced, which is why the plate choice belongs in the design stage rather than the fit-out stage.
In apartments, yes, more often than clients expect. A spare gang costs a mechanism and saves a wall later when a balcony light or an exhaust fan is added.
Wiring it as a two way gang with the second terminal unused means it can become a two way circuit without changing the plate.
Two reasons, and both are visible on a brushed face. Either the plate is bowed because the fixing screws were over-tightened, or the mechanisms are not evenly spaced because the plate was assembled from mixed batches.
Check flatness with a straight edge first; if the plate is flat, the spacing is the issue and the plate should be replaced.
Yes. The 16A mechanism fits the same plate and the same cut-out, so a four gang plate can carry three 10A gangs and one 16A gang for a heavier load. Tell us which gang is 16A at the quotation stage, because it is assembled differently and cannot be swapped on site.
|
High-Quality Material
|
The CS308/CFS307 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS308/CFS307 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS308/CFS307 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS308/CFS307 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
