

The horizontal double with an isolating switch, on a 121 × 80 mm brushed aluminium face. It is the plate for two appliances that stay plugged in and need to be disconnected without being unplugged.
Turning the switch off de-energises both outlets. In a laundry or a media unit that is one action instead of two, and it does not require reaching behind anything.
Between a plain double and two switched singles, this is the configuration that keeps one cut-out while still offering isolation. It is the plate most often specified where a double was planned and a switched outlet was needed afterwards.
Appliance positions are usually tiled or painted surfaces at bench height, where a moulded plate is the only plastic fitting in the room. A brushed aluminium face sits with the tapware and the splashback.
| Parameter | Details |
|---|---|
| Product | Australian standard 2 gang switched power point, brushed aluminium plate |
| Outlet Type | 2 x 10A, 3 pin, AS/NZS 3112 configuration, with child shutters |
| Switch | 10A single pole switch on the same plate, isolating the outlets |
| Rated Voltage | AC250V |
| Configuration | Two outlets plus one isolating switch |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS314 | 1 outlet, 10A, with extra switch |
| CS315 | 2 outlets, 10A, plain |
| CS316 | 2 outlets, 10A, with extra switch |
| CS316-V | 2 outlets, 10A, with extra switch, vertical |
The switch isolates the outlets on the plate in the standard build. Where one outlet has to remain permanent, the internal linking is set at assembly and must be stated on the order.
The plain double without a switch is CS315, and the switched single outlet is CS314. All four configurations appear on the CS brushed aluminium series page.
A double power point solves the outlet count. It does not solve the problem of an appliance that stays plugged in behind something and needs to be isolated without being reached. That is what the third position on this plate is for.
The CS316 carries two 10A Australian outlets with child shutters and a 10A isolating switch on a 121 × 80 mm brushed aluminium face. Terminals take back and side cable entry, and both outlets are certified to AS/NZS 3112.
It is the plate that gets specified when a double was planned and a switched outlet turns out to be needed, one cut-out, one plate, one action to kill both appliances. The alternative is two switched singles, which costs an extra box and an extra alignment on a metal finish.

The switch only earns its place where the outlets are hard to reach. Behind a washing machine, under a bench, inside a cupboard, behind a media unit: in each case the plugs are inaccessible and a switch on the plate is the practical disconnection point.
In open positions where plugs are pulled regularly, the switch is one more thing to leave in the wrong position, and a plain double is both cheaper and clearer.
In the standard build, yes. The switch takes the plate supply, so both outlets go dead together.
If one outlet has to stay live, that is set during assembly. Say so at the order stage, because it cannot be changed on site.
Two switched singles give independent control: each appliance isolated on its own. The double with one switch cannot do that, because both outlets go dead together.
If the two appliances are worked independently, a washer and a dryer run at different times, or one is on permanently, two singles or a mixed plate is the right answer. If they are switched together, the double is tidier and cheaper.
The decision is whether the two appliances are switched together or independently.
Custom anodised colours, laser marking and retail packaging on the switched double power point platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors supplying laundry, kitchen and media-unit fit-outs.
Account management, Australian datasheets and priority production for partners building a full metal range.
Tell us the appliances and whether both need to be switched, and we confirm the configuration before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with the consignment.
Contact Our Sales TeamOutlet count. CS314 is one outlet with an isolating switch; CS316 is two outlets with one switch. The switch behaves the same way in both, taking the plate supply so the outlets go dead together.
In the standard build, yes. If one outlet has to remain live while the other is switched, that is an assembly variation and has to be stated on the order, because it changes the internal linking and cannot be altered on site.
No. It is a single pole isolating switch for the plate, not a two way lighting switch. If you need a two way function at the same position, that is a mixed plate with a separate lighting gang, which we build to order.
Slightly more in product, less in installation. One box, one cut-out, one plate to level, and one piece of aluminium carrying the grain. On a metal finish the alignment alone usually decides it.
|
High-Quality Material
|
The CS316 / CS316 15A features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS316 / CS316 15A switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS316 / CS316 15A switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS316 / CS316 15A guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.