

The vertical plate is the same product turned on its side: 80 mm across, 121 mm tall. It exists for the wall that has height but only 80 to 90 mm of width, a pier between a door frame and a corner, a joinery return, a bulkhead end.
A single mechanism on an 80 mm face is the least crowded configuration in the range. The switch sits centred with even margins on both sides, which is what makes a narrow plate read as deliberate rather than as a plate that did not fit.
On a vertical plate the brushed direction follows the height, not the width. That is the detail that makes a pair of vertical plates on either side of a door read as a set, and the detail that shows immediately if one of them was cut the other way.
The mechanism, terminals and ratings are unchanged from the horizontal plate, and the wall box is the standard Australian format. Only the face dimensions and the fixing centres change.
| Parameter | Details |
|---|---|
| Product | Australian standard 1 gang wall switch, vertical brushed aluminium plate |
| Switching Function | 2 way (SPDT); usable as 1 way when only two terminals are wired |
| Rated Current | 10A / 16A standard; intermediate and double pole on the same plate |
| Rated Voltage | AC250V |
| Number of Gangs | 1 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS301-V | 1 gang, 1 way, 10A, vertical |
| CS302-V | 1 gang, 2 way, 10A, vertical |
| CS302-V/16A | 1 gang, 2 way, 16A, vertical |
| CS302-VDP | 1 gang, double pole, 10A, vertical |
The vertical plate carries the same model number as the horizontal one with a V suffix. A project that mixes both orientations keeps one mechanism family and one set of spares.
The horizontal version of this switch is CS302. The rest of the vertical plates are listed on the CS brushed aluminium series page.
There is a particular kind of wall that defeats a standard Australian plate: the pier between a door frame and a corner, the return beside a joinery unit, the end of a bulkhead. It has height, it has a switch position, and it does not have 121 mm of width.
The CS302-V is the same one gang switch on an 80 mm wide by 121 mm tall brushed aluminium face. The mechanism, the terminals and the AS/NZS 3112 certification are unchanged; only the plate and the fixing centres differ, so an electrician who knows the range does not need new instructions.
Because the face is narrow, the fit is the whole story. A vertical plate that sits 2 mm off centre on an 80 mm pier is obvious, while the same error on a 121 mm plate is not.
That makes the box position, not the product, the thing to get right at first fix.

Measure the clear wall width before you specify. A vertical plate needs 80 mm for the face plus a few millimetres either side to seat it, and a corner or a door architrave eats into that quickly.
Below about 90 mm clear, the vertical plate is not a preference, it is the only product that fits.
The second case is visual rather than dimensional. On a full-height joinery return or a slim pier, a horizontal plate looks like it was rotated by mistake; a vertical plate follows the architecture. Designers specify it for that reason even where 121 mm would fit.
Brushed aluminium has a direction, and on a vertical plate that direction runs up and down. Two plates brushed in different directions on the same wall catch the light differently, which reads as a colour difference even when both are the same anodised batch.
We brush vertical plates along the long axis and keep every plate in an order on the same grain. If a project needs both orientations, say so at the order stage rather than adding the vertical plates later, a top-up order is a new batch and a new brushing run.
Vertical plates are cut and brushed separately from horizontal ones, because the grain has to follow the long axis. Every plate for an order comes from one sheet, and the colour is checked against an approved physical sample before assembly.
Each switch is function tested on the finished plate. For OEM orders the metal face can be laser marked and the plate packed to your retail specification, with vertical and horizontal plates supplied in one consignment so the finishes match.
A narrow plate is ordered like a standard one, but the wall measurement decides whether it will fit at all.
Custom anodised colours, laser marking and retail packaging on the vertical one gang platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors stocking vertical plates alongside the horizontal range.
Account management, Australian datasheets and priority production for partners building a full metal range.
Send the clear wall width and the function you need, and we confirm whether the vertical plate fits before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with the consignment.
Contact Our Sales TeamThe plate is 80 mm wide, so allow at least 80 mm plus a couple of millimetres on each side to seat it.
In practice, plan for 90 mm clear between obstructions, because a plate tight against an architrave or a corner is difficult to fit flat and looks cramped even when it fits.
Physically yes, because the fixing centres are symmetric, but the brushed grain would then run across the plate instead of along it, which is the one thing the vertical plate is made to avoid.
If you need a horizontal plate, order the horizontal model; the two are different part numbers for that reason.
Yes. The box is the standard Australian format; the plate and its fixing centres are what change. That is why a vertical plate can replace a horizontal one at the same position without reworking the wall, provided the box is square and flush.
Because the margins are smaller. On an 80 mm face a switch that is 2 mm off centre is visible as unequal margins, and a bowed plate shows a shadow line down one side. The plate is not less tolerant, it is just less able to hide a rough first fix.
|
High-Quality Material
|
The CS302-V/CS301-V/CS302DP-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS302-V/CS301-V/CS302DP-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS302-V/CS301-V/CS302DP-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS302-V/CS301-V/CS302DP-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
