

Three mechanisms stacked on an 80 mm wide face. It is the point where the vertical format starts to earn its keep: three circuits on a wall that would not take a single horizontal plate.
Where a corridor wall is broken by door frames, the clear sections are narrow and tall. Three circuits, corridor, stair and store, land on one vertical plate rather than three plates at different heights.
With three gangs the sequence becomes a small system: the top gang at standing eye height, the middle at hand height, the bottom for occasional use. Once the plate is fitted, that order is what people learn.
Mechanism, terminals and ratings unchanged; only the face dimensions and the arrangement differ. A project can specify horizontal three gang in one area and vertical in another without splitting the mechanism family.
| Parameter | Details |
|---|---|
| Product | Australian standard 3 gang wall switch, vertical brushed aluminium plate |
| Switching Function | 2 way (SPDT) per gang; individual gangs available as 1 way, intermediate or double pole |
| Rated Current | 10A per gang; 16A on request |
| Rated Voltage | AC250V |
| Number of Gangs | 3 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS305-V | 3 gang, 1 way, 10A, vertical |
| CS306-V | 3 gang, 2 way, 10A, vertical |
| CS306-V/16A | 3 gang, 2 way, 16A, vertical |
| CS306-VDP | 3 gang, double pole, 10A, vertical |
Three stacked gangs are usually assembled to a function list rather than held as stock, so confirm the function of each position in writing before production.
The three gang plate is also available horizontally as CS306 for wider walls. All plate sizes and orientations are listed under the CS brushed aluminium range.
A corridor wall is a sequence of door frames with narrow clear sections between them. The clear sections are tall and 80 to 100 mm wide, which is exactly the shape of the vertical plate and exactly the wrong shape for a horizontal one.
The CS306-V stacks three two way mechanisms on an 80 mm by 121 mm brushed aluminium face, each 10A at 250V, with intermediate or double pole available on any position. Terminals take back and side cable entry.
Stacking three changes how the plate is read. From standing height the eye reaches the top gang first, so the corridor or stair light belongs there; the bottom gang is for the circuit used least. That order, once fitted, is what every occupant learns without being told.

The useful way to plan a stacked plate is by reach rather than by circuit importance.
Standing eye and hand height sits at the top gang; a comfortable hand height at the middle; the bottom gang is reached by bending slightly and is the right place for a store room or a rarely used circuit.
This matters most where the plate serves a corridor used at night. The top gang is the one found without looking, so it should be the corridor light rather than the store.
The one a standing adult uses most. The top gang sits closest to standing eye and hand height, so the corridor or stair light belongs there rather than in the store room.
The bottom gang is the one people bend for. Put the occasional circuit there and a tall plate stops feeling like a compromise.
An 80 mm aluminium plate is a small, stiff panel. It will not follow a wavy wall, and the margins either side of the mechanisms are small, so a box that is 2 mm off centre is visible.
The compensation is that a narrow plate is also less reflective than a 121 mm one, so it hides small colour variation better across a room. Two vertical plates on the same corridor read as a pair even if the light falls differently on them.
Three gangs stacked is a project item. The function per position is the part that has to be written down.
Custom anodised colours, laser marking and retail packaging on the vertical three gang platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors supplying corridors, stairs and common areas.
Account management, Australian datasheets and priority production for partners building a full metal range.
Send the clear width and the circuit for each position, and we confirm the stacking order and the plate before quoting. Factory-direct pricing is quoted per order; SAA documentation ships with the consignment.
Contact Our Sales TeamIt is available, but it puts the bottom gang below a comfortable reach for many adults and well below for anyone seated. Where four circuits converge on a narrow wall, two vertical plates of two along the corridor usually serves better than one plate of four.
By reach. The top gang sits at standing eye and hand height and should carry the circuit used most, typically the corridor or stair light. The middle is a comfortable hand height, and the bottom is for the occasional circuit such as a store room.
It uses the standard Australian box format for the plate, with the mechanisms stacked rather than spread. Box depth is the same as a horizontal three gang; what matters is that the box is set flush and square, because an 80 mm plate shows misalignment more than a wider one.
Because the clear wall sections between door frames are tall and narrow. A horizontal 121 mm plate will not fit between the frames without crowding them, while an 80 mm vertical plate sits inside the pier with a margin. It is a dimensional answer rather than a stylistic one.
|
High-Quality Material
|
The CS306-V/CS305-V/CS306DP-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS306-V/CS305-V/CS306DP-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS306-V/CS305-V/CS306DP-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS306-V/CS305-V/CS306DP-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
