

The vertical single power point puts the outlet on an 80 mm wide by 121 mm tall brushed aluminium plate, for the pier or return that has height but not width.
The plate is available as a 10A outlet or a 15A outlet for a heavier appliance. Both are AS/NZS 3112 configurations with child shutters, and both use the same plate and cut-out.
Rotating the plate rotates the outlet, so the earth pin faces sideways rather than down. That is worth checking against a moulded right-angle plug, because the cable then exits horizontally instead of downward.
The usual positions are a pier beside a bed, a return at the end of a joinery run, and a narrow nib wall in a bathroom where a horizontal plate would crowd the trim.
| Parameter | Details |
|---|---|
| Product | Australian standard 1 gang power point, vertical brushed aluminium plate |
| Outlet Type | 10A or 15A, 3 pin, AS/NZS 3112 configuration, with child shutter |
| Rated Current | 10A or 15A |
| Rated Voltage | AC250V |
| Configuration | Single outlet, unswitched |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS313-V | 1 gang, 10A or 15A, vertical plate |
| CS313-V-USB | 1 gang, 10A, with 2 x USB, vertical |
| CS313-V-A+C | 1 gang, 10A, with USB-A and USB-C, vertical |
| CS313 | 1 gang, 10A, horizontal plate |
The vertical outlet uses the same plate and cut-out as the USB variants, so a narrow wall can carry charging and non-charging positions in the same finish.
The same outlet on a horizontal plate is CS313. Vertical and horizontal outlets are both listed in the CS series catalogue.
A single power point needs 80 mm of face or 121 mm, depending on which way you turn it. On a pier beside a bed, a joinery return or a nib wall, the available width is often under 100 mm, which rules out the horizontal plate before anything else is decided.
The CS313-V puts the outlet on an 80 mm by 121 mm brushed aluminium face, available as 10A or 15A, both AS/NZS 3112 configurations with child shutters. Terminals take back and side cable entry.
One thing to check before ordering: the outlet rotates with the plate, so the earth pin faces sideways rather than down. With a straight plug that is invisible; with a moulded right-angle plug the cable exits horizontally, which may or may not suit the furniture beside it.

On a horizontal plate the earth pin sits at the bottom and a right-angle plug drops its cable downward. Rotate the plate and the same plug sends the cable sideways, toward the bed or away from it depending on which side the plate is mounted.
For a lamp or a phone charger with a straight plug this never matters. For a bedside appliance with a moulded right-angle lead it decides whether the cable runs neatly down the wall or loops back across the bedside table.
Bedside piers, joinery returns, nib walls and the narrow panel between a wardrobe and a door. In each case the position is real, the circuit exists, and the wall does not offer 121 mm.
It also appears where a horizontal outlet would foul a handle or a drawer line. A vertical plate occupies the same height as a horizontal one, so it solves a width problem rather than a height problem, worth remembering when the obstruction is actually vertical.
Each vertical single outlet is assembled on the vertical plate and tested for continuity, shutter operation and polarity before packing. The plate is inspected for grain direction and colour, because a vertical plate brushed across instead of along is immediately visible.
For OEM orders the metal face can be laser marked and the plate packed to your retail specification, with vertical and horizontal outlets in one consignment so the finishes match.
The narrow outlet is ordered by position, because the plug direction depends on which side of the furniture it sits.
Custom anodised colours, laser marking and retail packaging on the vertical power point platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors stocking vertical outlets alongside the horizontal range.
Account management, Australian datasheets and priority production for partners building a full metal range.
Send the clear width, the appliance and which side the plate sits on, and we confirm 10A or 15A and the plate before quoting. Factory-direct pricing is quoted per order; SAA documentation ships with the consignment.
Contact Our Sales TeamYes. The outlet follows the plate, so the earth pin faces sideways rather than downward. With a straight plug nothing changes; with a moulded right-angle plug the cable leaves horizontally, so check one plug against the intended position before the second fix.
Yes, on the same 80 mm face and the same cut-out. A 15A plug body is larger than a 10A one, so the margins on a narrow plate are tighter and worth confirming with the appliance plug before ordering.
No. It is IP20 and indoor rated. A position that gets wet needs a weatherproof enclosure rather than a vertical plate, and the finish does not change that.
Because the positions that need them come in pairs: either side of a bed, either side of a joinery return, two sides of a nib wall. Ordering them together keeps one anodising batch and one brushing direction across the pair.
|
High-Quality Material
|
The CS313-V/CS335-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS313-V/CS335-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS313-V/CS335-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS313-V/CS335-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
