CS313-V-USB Vertical Power Point with USB | Aluminium

Category:CS SERIES
Model No.:
CS Series
Material:
Aluminum plate
Current:
10A
Voltage:
250V
Standard:
AU Standard
Dimension:
80mm*121mm
Authentication:
SAA, ISO9001, ISO14001
Quality Guarantee
 
DESCRIPTION FEATURES COMPANY

Key Features & Typical Use

Charging on a Narrow Pier

Two USB ports beside a 10A outlet on an 80 mm wide vertical plate. It is the bedside configuration for a room where the pier beside the bed is too narrow for a horizontal plate.

No Plug Pack on the Bedside Table

The point of the USB ports is to remove the plug pack that would otherwise occupy the second outlet or crowd the table. On a vertical plate the outlet and ports are arranged along the height rather than the width.

Two Amps, Split Between Two Ports

Both ports share 2A at 5V, which is overnight charging for phones and small devices. It is not a laptop charger and it is not fast charging, and specifying it as one is the most common mistake with this product.

Bedside USB: Ports Above or Below the Outlet?

Above, for most beds. The ports land at table height where a hand arrives without looking, and the lamp lead falls away from the outlet underneath.

The orientation is set when the plate is built, so it belongs on the order. Small thing, and it decides whether the plate feels planned or merely fitted.

Specifications

ParameterDetails
Product Australian standard 1 gang power point with dual USB charger, vertical brushed aluminium plate
Outlet Type 10A, 3 pin, AS/NZS 3112 configuration, with child shutter
Rated Current 10A
Rated Voltage AC250V
USB Output 2 ports, 5V DC, 2A shared total
Terminals Screw terminals, back and side cable entry
Contact Material QSn6.5-0.1 tin phosphor bronze socket contacts
Panel Material Brushed aluminium plate, 80 × 121 mm
Surface Finish Hairline brushed; anodised colour layer
Available Colours Silver white, matte black, silver grey from stock; custom RAL on request
Mounting Standard Australian wall box, horizontal or vertical
Protection Degree IP20, indoor use
Standard AS/NZS 3112
Approval SAA
Warranty 15 years (IGOTO standard warranty)

CS Series Vertical Single Power Point Models

ModelConfiguration
CS313-V 1 gang, 10A or 15A, plain, vertical
CS313-V-USB 1 gang, 10A, with 2 x USB-A, vertical
CS313-V-A+C 1 gang, 10A, with USB-A and USB-C, vertical
CS313-USB 1 gang, 10A, with 2 x USB-A, horizontal

The charging variants share the plate and cut-out with the plain vertical outlet, so a room can mix them without changing the wall box or the plate size.

The horizontal charging outlet is CS313-USB. The plain and USB-C vertical versions are on the CS series page.

CS313-V-USB vertical brushed aluminium power point with USB ports

Charging Beside a Narrow Bed

Hotel rooms and small bedrooms put the power point on a narrow pier beside the bed, where the available width is often under 100 mm. That is the position a USB outlet is most wanted and least likely to fit in the horizontal format.

The CS313-V-USB puts a 10A Australian outlet and two 2A USB ports on an 80 mm by 121 mm brushed aluminium face. The outlet keeps its child shutter and AS/NZS 3112 certification, and the terminals take back and side cable entry.

The arrangement along the height is what makes it work: the outlet sits at one end, the ports at the other, and neither crowds the other. It is a detail that only exists because the plate is vertical.

Where the Ports Sit Relative to the Outlet

IGOTO switch and socket factory, assembly and testing lines in Yueqing

On a vertical plate the outlet and the USB ports are arranged along the height rather than across the width. Which end each occupies matters in use: with the outlet at the bottom, a lamp lead drops away cleanly and the ports sit at hand height on the table.

This is worth confirming at the order stage for a hotel, because the same plate installed the other way up puts the charging ports below the bedside table line, where guests reach for them blind.

Factory-Direct OEM / ODM Manufacturer

Charging Modules Behind a Narrow Plate

Every vertical USB outlet is tested as a unit: outlet continuity, shutter operation, both ports under load, and insulation between the charging module and the metal plate. Vertical plates are brushed along the long axis and inspected for colour before assembly.

For OEM orders the face can be laser marked and the plate packed to your retail specification. A room-block consignment can mix plain, USB and USB-C vertical plates in one finish.

  • OEM branding, laser marking on the metal face, custom anodised colours and retail packaging.
  • ODM options, port mix, outlet rating and vertical or horizontal plate.
  • Testing, both ports under load and module insulation checked per unit.
  • MOQ, room-block quantities with mixed variants in one carton.

Metal, Charging and a Narrow Face

The charging module has to be isolated from the anodised plate, and on a narrow plate the module sits in the same box depth as the wider version. Every unit is insulation tested before packing.

The face also runs warmer than a plain plate while charging, because the board dissipates into the metal. That is normal and within the design allowance, but it is worth knowing if a guest reports that the plate feels warm.

Australian standard switch and socket series on brushed aluminium plates

Buying Guide

CS313-V-USB vertical brushed aluminium power point with USB ports

Order by position: the plate only exists because the pier is narrow, so the width and the furniture layout decide it.

  1. Confirm the clear width on the pier.
  2. Confirm the outlet needs 10A or 15A.
  3. Confirm which end the ports should sit at, relative to the table.
  4. Approve a physical plate sample in the finish.
  5. Confirm the box depth against the charging module.
  6. Production with per-unit load testing.
  7. Dispatch from Yueqing in bulk or retail packaging.

How We Support Your Business

OEM customization of brushed aluminium switch plates, panel colours and laser marking

OEM / ODM

Learn more →

Custom anodised colours, laser marking and retail packaging on the vertical USB power point platform, with SAA documents for the certified range.


Anodised colours · Laser marking · SAA documents
Brushed aluminium switches and sockets installed in an Australian residential project

Wholesale

Learn more →

Factory-direct pricing with room-block quantities for hotel and serviced apartment refurbishments.


Factory pricing · Room blocks · Phased delivery
Function and endurance testing of Australian standard switches in the IGOTO laboratory

Distributor Support

Learn more →

Account management, Australian datasheets and priority production for partners supplying accommodation projects.


Account manager · Technical docs · Priority lead times

Charging on a Narrow Bedside Pier?

Tell us the pier width and which end the ports should sit at, and we confirm the plate before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with the consignment.

Contact Our Sales Team

Frequently Asked Questions

Can the plate be fitted with the ports at the bottom?

The plate is assembled with the outlet and ports at fixed ends, so the orientation is set at production rather than on site. If the ports need to be at the top or the bottom for a specific furniture layout, say so at the order stage.

How does this differ from the horizontal USB plate?

Electrically it is the same product: one 10A outlet plus two 2A USB ports. What changes is the face, 80 by 121 mm instead of 121 by 80, and the arrangement of the outlet and ports along the height rather than across the width. It exists for narrow positions.

Will the USB ports charge a tablet overnight?

Slowly. The two ports share 2A, so a tablet draws most of that budget and takes considerably longer than with its own charger. Phones and small devices are the intended load.

High-Quality Material
The CS313-V-USB features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
Long Life Cycle
Designed for durability, the CS313-V-USB switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
Enhanced Conductivity
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
Versatile Design
The sleek, modern design of the CS313-V-USB switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
High Safety Standards
With SAA certification and compliance with ISO9001 and ISO14001, the CS313-V-USB guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.

IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.   Our Core Values:

  1. Reliability: We provide long-lasting products with a 15-year warranty, backed by comprehensive technical support.
  2. Innovation: We offer customized solutions, including logo and packaging design, to meet the specific needs of our B2B clients.
  3. Global Reach: We serve clients across multiple regions, including Australia, South America, Southeast Asia, and Europe, with a strong focus on expanding our presence in key markets.
  4. Certifications: Our products are certified to SAA, ISO9001, and ISO14001, ensuring they meet international standards for quality and environmental management.

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>

GET A CONTACT
Tell Us Your Requirements
YOUR NAME
COUNTRY
COMPANY
YOUR EMAIL
YOUR PHONE
YOUR MESSAGE