

The vertical double puts two 10A outlets one above the other on an 80 mm wide face. On a laundry wall or a narrow appliance bay, that is the only way two outlets fit where the circuits already are.
Available as two 10A outlets or as a 10A and 15A combination, for an appliance bay where one machine draws more than the other. Both are AS/NZS 3112 configurations with child shutters.
Two outlets stacked means two plugs, and on a rotated plate both cables leave sideways rather than downward. In an appliance bay that decides whether the leads run behind the machine or across the front of it.
The common positions are behind a washing machine, beside a dryer, and at the end of a bench run where the wall narrows. Those are also positions where a horizontal plate fouls the machine or the trim.
| Parameter | Details |
|---|---|
| Product | Australian standard 2 gang power point, vertical brushed aluminium plate |
| Outlet Type | 2 x 10A, or 10A + 15A, 3 pin, AS/NZS 3112 configuration, with child shutters |
| Rated Current | 10A per outlet, or 10A + 15A |
| Rated Voltage | AC250V |
| Configuration | Two outlets, unswitched, stacked |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS315-V | 2 outlets, 10A, or 10A + 15A, vertical |
| CS316-V | 2 outlets, 10A, with extra switch, vertical |
| CS315 | 2 outlets, 10A, horizontal plate |
| CS315-V-A+C | 2 outlets with USB-A/C, vertical, project basis |
The 10A + 15A combination is assembled to order. State which outlet is 15A and whether it is the upper or lower position.
The horizontal double is CS315. The switched vertical version is CS316-V, and the full range is on the CS series page.
An appliance bay is a narrow place. The wall between a washing machine and a door frame is often 80 to 100 mm wide, and it already carries the circuit that has to be terminated there. A horizontal double will not fit without moving the machine.
The CS315-V stacks two outlets on an 80 mm by 121 mm brushed aluminium face, available as two 10A outlets or as 10A plus 15A. Both are AS/NZS 3112 configurations with child shutters.
Two stacked outlets also means two plugs leaving the face. On a rotated plate both cables exit sideways, which in a tight bay may run them behind the machine or across its front, worth checking with the actual plugs before the plate is fixed.

Two horizontal outlets put the two cables side by side, both leaving downward. Two stacked outlets put them one above the other, and on a vertical plate both leave to one side.
In a bay 200 mm deep that is the difference between leads running behind the machine and leads crossing the front. Check one plug of each type against the intended orientation before the second fix, because it cannot be changed after the plate is on.
Two single outlets stacked needs two boxes in a bay that has room for one, and two plates that will not share a grain direction. The vertical double uses one cut-out and one piece of aluminium.
The counter-argument is serviceability: replacing one outlet on a double means removing the plate. In an appliance bay that is a small job and a rare one, so the trade usually goes to the double.
Both outlets are tested on the finished plate for continuity, shutter operation and polarity, and for the 10A + 15A version the rating of each position is verified against the order before packing.
Vertical plates are brushed along the long axis and inspected for colour. OEM orders can carry laser marking and retail packaging, with vertical and horizontal plates in one consignment.
In a narrow bay the order is decided by the appliances and the plug leads, not by the finish.
Custom anodised colours, laser marking and retail packaging on the vertical double power point platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors supplying laundry and appliance-bay fit-outs.
Account management, Australian datasheets and priority production for partners building a full metal range.
Tell us the appliances and the clear width, and we confirm 10A or 10A + 15A and the stacking order before quoting. Factory-direct pricing is quoted per order; SAA documentation ships with the consignment.
Contact Our Sales TeamUsually the lower one, so the heavier appliance lead drops away cleanly and the lighter lead runs above it. Confirm it on the order, because the rating is assembled into a fixed position and cannot be swapped on site.
Yes, and in a laundry that is the constraint to check. Two appliances on one plate sit on one circuit, so a washer and a dryer running together load it. Where both draw heavily, the answer is two circuits and two plates rather than one vertical double.
No. The outlets rotate with the plate, so both cables leave sideways. In a tight bay this is the detail worth checking against the actual plugs before the plate is fixed.
Not as a standard catalogue item at this time; the vertical USB variants are built on the single outlet plate as CS313-V-USB and CS313-V-A+C. A double with USB in the vertical format can be built as an OEM configuration against a minimum quantity.
|
High-Quality Material
|
The CS315-V/CS337-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS315-V/CS337-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS315-V/CS337-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS315-V/CS337-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
