CS316-V Vertical Switched Double Power Point | Aluminium

Category:CS SERIES
Model No.:
CS Series
Material:
Aluminum plate
Current:
10A
Voltage:
250V
Standard:
AU Standard
Dimension:
80mm*121mm
Authentication:
SAA, ISO9001, ISO14001
Quality Guarantee
 
DESCRIPTION FEATURES COMPANY

Key Features & Typical Use

Two Outlets Plus an Isolating Switch

A switch on the plate isolates the outlets without pulling the plugs. On a vertical plate that switch occupies one position in the stack, above or below the two outlets.

For Bays You Cannot Reach Into

The point of a switched plate is access. Behind a washing machine, inside a cupboard, under a bench: places where the plug is out of reach and the switch is the only disconnection point a person can use.

Stacking Order Decides Usability

With a switch and two outlets stacked on 121 mm, the order matters more than on any other plate. Put the switch where a hand naturally arrives, not where the wiring was easiest.

Switch Above or Below the Outlets?

Wherever a hand arrives without looking. Above a washing machine that is the top of the stack. Under a bench it is often the bottom, because the hand comes up from below the worksurface.

In the middle is possible and rarely right. It splits the two outlets and makes both of them harder to reach.

Specifications

ParameterDetails
Product Australian standard 2 gang switched power point, vertical brushed aluminium plate
Outlet Type 2 x 10A, 3 pin, AS/NZS 3112 configuration, with child shutters
Switch 10A single pole switch on the same plate, isolating the outlets
Rated Voltage AC250V
Configuration Two stacked outlets plus one isolating switch
Terminals Screw terminals, back and side cable entry
Contact Material QSn6.5-0.1 tin phosphor bronze socket contacts
Panel Material Brushed aluminium plate, 80 × 121 mm
Surface Finish Hairline brushed; anodised colour layer
Available Colours Silver white, matte black, silver grey from stock; custom RAL on request
Mounting Standard Australian wall box, horizontal or vertical
Protection Degree IP20, indoor use
Standard AS/NZS 3112
Approval SAA
Warranty 15 years (IGOTO standard warranty)

CS Series Vertical Switched Power Point Models

ModelConfiguration
CS316-V 2 outlets, 10A, with extra switch, vertical
CS315-V 2 outlets, 10A or 10A + 15A, plain, vertical
CS316 2 outlets, 10A, with extra switch, horizontal
CS314 1 outlet, 10A, with extra switch, horizontal

The switch position within the stack is set at assembly. Confirm whether it sits above or below the outlets, and say which outlets it isolates if the two are linked separately.

The horizontal switched double is CS316, and the plain vertical double is CS315-V. Both are listed in the CS series catalogue.

CS316-V vertical brushed aluminium switched double power point

Isolation You Can Reach, on a Wall You Cannot Widen

A switched power point exists because the plug is somewhere a person cannot comfortably get to. Add a narrow wall and the product has two problems to solve at once: the outlets have to stack, and the switch still has to be the part a hand finds first.

The CS316-V puts two 10A outlets and an isolating switch on an 80 mm by 121 mm brushed aluminium face. The outlets are AS/NZS 3112 configurations with child shutters; the switch is a 10A mechanism on the same plate.

The stacking order is the design decision. Switch at the top puts it at hand height above the machine; switch at the bottom suits a bench where the outlets need to be high. Neither is universal, and it cannot be changed after the plate is built.

Where to Put the Switch in the Stack

IGOTO switch and socket factory, assembly and testing lines in Yueqing

The switch belongs where a hand arrives without looking. Above a washing machine that is the top of the stack; under a bench it may be the bottom, because the hand comes up from below the worksurface.

Putting it in the middle is possible but rarely right: it splits the two outlets and makes both harder to reach. Two outlets together and the switch at one end is the arrangement that works.

Factory-Direct OEM / ODM Manufacturer

Switch and Outlets Linked and Tested Together

A switched plate has one more failure point than a plain one: the link between the switch and the outlets. We assemble and test the plate as one circuit, verifying that the switch isolates the outlets and that the outlets are dead when it is off.

Vertical plates are brushed along the long axis and inspected for colour before assembly. OEM orders can carry laser marking, and the switch position can be set to the top or bottom of the stack.

  • OEM branding, laser marking on the metal face, custom anodised colours and retail packaging.
  • ODM options, switch at top or bottom, one or both outlets isolated, vertical or horizontal plate.
  • Testing, switch-to-outlet isolation verified on the finished plate.
  • MOQ, project quantities with mixed variants in one carton.

Switched Plates and Appliance Loads

A switch on the plate is rated for the outlets it controls, which in this case is two 10A outlets. It is not a circuit isolator and does not replace one on a fixed appliance with its own circuit.

Where the appliance is hardwired, the isolation requirement is met by the circuit isolator, not by a plate. Where the appliance plugs in and stays plugged in, this plate is the practical disconnection point.

Australian standard switch and socket series on brushed aluminium plates

Buying Guide

CS316-V vertical brushed aluminium switched double power point

Three decisions: rating, switch position, and what the switch isolates.

  1. Confirm the appliance and its rating.
  2. Decide whether the switch sits above or below the outlets.
  3. Confirm whether the switch isolates both outlets or one.
  4. Approve a physical plate sample in the finish.
  5. Confirm the box depth and that the plate clears the appliance.
  6. Production with isolation testing.
  7. Dispatch from Yueqing in bulk or retail packaging.

How We Support Your Business

OEM customization of brushed aluminium switch plates, panel colours and laser marking

OEM / ODM

Learn more →

Custom anodised colours, laser marking and retail packaging on the vertical switched power point platform, with SAA documents for the certified range.


Anodised colours · Laser marking · SAA documents
Brushed aluminium switches and sockets installed in an Australian residential project

Wholesale

Learn more →

Factory-direct pricing with flexible MOQ for distributors supplying laundry, kitchen and appliance-bay fit-outs.


Factory pricing · Flexible MOQ · Global shipping
Function and endurance testing of Australian standard switches in the IGOTO laboratory

Distributor Support

Learn more →

Account management, Australian datasheets and priority production for partners building a full metal range.


Account manager · Technical docs · Priority lead times

A Switched Outlet in a Narrow Appliance Bay?

Tell us the appliance, the bay depth and where the hand arrives, and we confirm the switch position and linking before quoting. Factory-direct pricing is quoted per order; SAA documentation ships with the consignment.

Contact Our Sales Team

Frequently Asked Questions

Does the switch isolate both outlets?

In the standard build, yes, the switch takes the plate supply, so both outlets go dead together. If a project needs one outlet switched and the other permanent, the linking is set at assembly, so it has to be stated on the order rather than modified on site.

Should the switch be above or below the outlets?

Wherever a hand arrives without looking. Above a washing machine that is the top of the stack; under a bench it is often the bottom. Putting the switch between the two outlets is possible but makes both harder to reach.

Is this a substitute for a circuit isolator?

No. It isolates the outlets on the plate, not a circuit. A fixed appliance with its own circuit needs an isolator rated for that circuit, which is a different product and a different position on the wall.

High-Quality Material
The CS316-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
Long Life Cycle
Designed for durability, the CS316-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
Enhanced Conductivity
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
Versatile Design
The sleek, modern design of the CS316-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
High Safety Standards
With SAA certification and compliance with ISO9001 and ISO14001, the CS316-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.

IGOTO – A Trusted Manufacturer of High-Quality Electrical Products

Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.

Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.

 

Our Core Values:

  1. Reliability: We provide long-lasting products with a 15-year warranty, backed by comprehensive technical support.
  2. Innovation: We offer customized solutions, including logo and packaging design, to meet the specific needs of our B2B clients.
  3. Global Reach: We serve clients across multiple regions, including Australia, South America, Southeast Asia, and Europe, with a strong focus on expanding our presence in key markets.
  4. Certifications: Our products are certified to SAA, ISO9001, and ISO14001, ensuring they meet international standards for quality and environmental management.

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.

More About IGOTO >>

GET A CONTACT
Tell Us Your Requirements
YOUR NAME
COUNTRY
COMPANY
YOUR EMAIL
YOUR PHONE
YOUR MESSAGE