

CS320 is the free-to-air aerial outlet. CS320S is the satellite version with an F-type connector. Both sit on the same 121 by 80 mm brushed aluminium plate as the rest of the range.
The plate joins two cables. It does not amplify, split or filter the signal. What arrives at the back of the television is what arrived at the wall, minus the loss of two connectors.
Television positions sit behind a screen or beside a media unit, at eye level, in the room people look at most. A metal plate beside a metal screen bezel looks intentional. A plastic one does not.
Look at the connector on the cable. A push-on plug is a terrestrial aerial. A screw thread is an F-type satellite connector.
The two plates look similar on the face, which is why the wrong one gets ordered. Check the cable before ordering, not after it arrives.
| Parameter | Details |
|---|---|
| Product | TV aerial wall socket, brushed aluminium plate |
| Function | Passive coaxial outlet for free-to-air television |
| Connector | Australian coaxial TV connector, female at the face |
| Satellite Variant | CS320S, F-type connector on the same plate |
| Rated Voltage | Not applicable, passive signal plate |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed, anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box |
| Plate Standard | AS/NZS 3112 plate system |
| Approval | SAA documentation supplied per order |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS320 | TV aerial socket, 1 gang |
| CS320S | satellite socket, 1 gang, F-type |
| CS322 | TV plus telephone or data socket |
| CS322S | satellite plus telephone or data socket |
| CS320-V | TV or satellite socket, vertical plate |
The TV and satellite plates use the same cut-out and the same plate size, so a media wall can carry both without a second box type.
The satellite version is CS320-V, and the combined TV plus data plate is CS322. All signal plates are on the CS series page.

A television position is a visible position. The plate sits behind the screen or beside the unit, at the height people look at, in the room they spend the evening in. It is a small part of the job and a part that gets noticed.
The CS320 is a passive coaxial outlet on a brushed aluminium plate. Cable in at the back, television lead out at the front. Nothing else happens inside the plate.
If the install is satellite rather than free-to-air, the CS320S puts an F-type connector on the same plate. Same size, same finish, different connector.
Free-to-air television in Australia uses a coaxial aerial lead. Satellite uses a screw-on F-type connector. They are not interchangeable, and the plate has to match the cable that was pulled to the position.
Check what the installer actually ran before ordering. A satellite cable behind a TV plate will not connect, and swapping the plate later means ordering a second one from a different anodising batch.
The plate, connector and internal link are assembled and checked before packing, then packed interleaved so the brushed face arrives unmarked. Plates for one order are cut from the same sheet.
For OEM orders the face can be laser marked. A media wall can be shipped as one set with TV, data and power plates in the same finish.
Two connectors and a short internal link add a small amount of loss. In a normal house with a reasonable signal that is not measurable in practice. In a weak signal area, every connection counts.
The plate cannot fix a weak signal. If the picture breaks up before the wall plate is fitted, it will break up after. Amplification belongs at the aerial or in the roof space, not behind a faceplate.
The decision is which cable was run, not which plate looks better.
Custom anodised colours, laser marking and retail packaging on the TV and satellite plate range.
Factory-direct pricing with flexible MOQ for distributors stocking media wall plates alongside power points.
Account management and priority production for partners supplying full media wall sets in one finish.
Tell us the cables at each position and we confirm the plates before quoting. Order them with the power points so the whole wall comes from one anodising batch.
Contact Our Sales TeamNot in the single gang format. The single plate carries one connector. CS322 and CS322S pair the TV or satellite connector with a telephone or data port, which is the usual way to get two cables on one plate.
It adds the loss of two connectors, which is small. In a normal installation you will not notice it. In a weak signal area the aerial and the cable matter far more than the plate.
No. The TV socket takes the push-on coaxial aerial connector. The satellite socket takes a screw-on F-type connector. They fit different cables, so the plate must match what was run to the position.
|
High-Quality Material
|
The CS320/CS320S features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS320/CS320S switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS320/CS320S switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS320/CS320S guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
