

The F-type connector takes the screw-on satellite cable rather than the push-on aerial plug. Same plate size as the rest of the range.
The second port is a telephone or data socket, specified at order. It is the usual pairing where the satellite box also needs a network connection.
Many installations run satellite for a subscription service and aerial for local channels. CS322S covers the satellite side, CS322 covers the aerial side.
The plate sits behind or beside the screen, at the height people look at. In brushed aluminium it reads with the screen and the cabinet rather than against them.
| Parameter | Details |
|---|---|
| Product | Satellite socket with telephone or data socket, brushed aluminium plate |
| Port 1 | F-type satellite connector, screw-on |
| Port 2 | Telephone socket or CAT data socket, specified at order |
| Rated Voltage | Not applicable, passive signal plate |
| Plate Size | 121 × 80 mm |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed, anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box |
| Plate Standard | AS/NZS 3112 plate system |
| Approval | SAA documentation supplied per order |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS322S | satellite plus telephone or data socket |
| CS320S | satellite socket only, F-type |
| CS322 | TV aerial plus telephone or data socket |
| CS320 | TV aerial socket only |
The satellite connector is not interchangeable with the aerial connector. Check which cable was run before ordering, because the two plates look similar on the face.
The aerial version is CS322, and a satellite socket on its own is CS320S. Both are listed on the CS series page.
Satellite cable ends in a screw-on F-type connector, not the push-on plug used for a terrestrial aerial. If the wall plate carries the wrong connector, the cable cannot be terminated.
The CS322S puts the F-type socket on a brushed aluminium plate, paired with a telephone or data port for the set-top box that also wants a network connection.
It is the same plate size and the same finish as the aerial version, so a room with both feeds looks consistent rather than mixed.

Satellite cable is usually a heavier coaxial with a screw thread on the connector. Terrestrial aerial cable ends in a push-on plug. The two are close in diameter and easy to confuse when the wall is open.
Ask the installer which was run. Ordering the wrong plate is a second order, a second anodising batch and a second visit, and the position stays unfinished in between.
Satellite receivers are less forgiving than a television tuner. A marginal cable or a poor connector shows up as blocking in rain rather than as a slightly soft picture.
The plate contributes the loss of two connectors. Where the dish alignment and cable run are good, that is negligible. Where the signal is already marginal, the plate is not the place to look for the problem, but it does not help.
Each plate is assembled with the F-type connector and the second port you specify, then checked before packing. Plates come from one sheet per order so the finish matches the rest of the wall.
For OEM orders the face can be laser marked and a complete media wall shipped as one set with aerial, satellite, data and power plates.
The order depends on one fact: was the cable satellite or aerial.
Custom anodised colours, laser marking and retail packaging on the satellite and combination plate range.
Factory-direct pricing with flexible MOQ for distributors stocking satellite plates alongside aerial versions.
Account management and priority production for partners supplying complete media wall sets.
Tell us the cable and the second port, and we confirm the plate before quoting. Order it with the room’s power points so the finish matches.
Contact Our Sales TeamThe first port. CS322 takes a push-on aerial connector for free-to-air television. CS322S takes a screw-on F-type connector for satellite. The second port and the plate are the same.
No. It is part of the plate assembly. If the cable turns out to be aerial rather than satellite, the plate is replaced rather than adapted.
Not directly. The connectors are different, and an aerial lead will not fit an F-type socket. Some installers use adapters, which add another connection and another point of loss.
It needs enough depth for the coaxial cable to bend behind it. A shallow box with a tight fold is the usual cause of a signal problem that appears only in bad weather.
|
High-Quality Material
|
The CS322S/CS322S-1 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS322S/CS322S-1 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS322S/CS322S-1 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS322S/CS322S-1 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
