

The dimmer takes a 400W lighting load. That is a comfortable figure for a room of halogens or a large bank of dimmable LEDs, and it is a ceiling rather than a target.
An isolating switch sits beside the dial. Turning it off kills the circuit at the wall, which is useful when a lamp needs changing or a smart bulb needs to be reset.
The dimmer expects a dimmable lamp or a dimmable driver. A standard LED lamp on a dimmer will flicker, buzz, or drop out at low levels, and no plate can fix that.
With dimmable ones, yes. Non-dimmable LEDs flicker, buzz or drop out part way down, and that is the lamp rather than the dimmer.
Mixed lamp types on one circuit dim unevenly even when everything is working. Keep one lamp family per dimmed circuit.
| Parameter | Details |
|---|---|
| Product | Rotary dimmer with isolating switch, brushed aluminium plate |
| Load | 400W maximum, dimmable lighting only |
| Rated Voltage | AC250V |
| Control | Rotary dial plus single pole switch |
| Plate Size | 121 × 80 mm |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed, anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box |
| Plate Standard | AS/NZS 3112 plate system |
| Approval | SAA documentation supplied per order |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS328 | 400W dimmer with switch, horizontal |
| CS328-V | 400W dimmer with switch, vertical plate |
| CS302 | standard rocker switch, same plate |
| CS314 | switched power point, same plate |
Dimmer and fan controller are different devices. A lighting dimmer on a fan motor will hum and can overheat, so confirm the load before ordering.
The vertical version is CS328-V, and the standard rocker for the same plate is CS302. The full range is on the CS series page.

A dimmer on its own has one problem: there is no way to cut the circuit at the wall without turning the dial all the way down. Some dimmers click off at the bottom, some do not.
The CS328 puts a 400W dimmer and a separate isolating switch on one brushed aluminium plate. The dial sets the level, the switch kills the circuit.
The 400W figure is the maximum the dimmer will carry. Most rooms use a fraction of it. Where the load is close to the limit, check whether the lamps are dimmable and what their combined wattage actually is before specifying.
A dimmer controls the supply, and the lamp has to be able to follow it. A dimmable LED will run smoothly from full down to a low level. A non-dimmable one will flicker, buzz, or switch off part way down and never come back until the dial is raised.
If the client has already bought lamps, check them first. If the lamps are being specified, ask for dimmable drivers and check the minimum load the dimmer needs, because a single low-wattage LED can sit below it.
Each plate is assembled with the dimmer module and the isolating switch, then checked for switching and for dial travel before packing. Plates come from one sheet per order so the finish matches the wall.
For OEM orders the face can be laser marked and the plate packed with the room set.
Not on a fan. A fan motor is an inductive load and needs a controller designed for it. A lighting dimmer on a fan usually produces hum and can overheat the motor or the dimmer.
Not on a circuit with a mixture of dimmable and non-dimmable loads. The non-dimmable ones will behave badly and take the rest of the circuit with them.
Check the load before the finish. A dimmer that does not suit the lamps is a callback.
Custom anodised colours, laser marking and retail packaging on the dimmer plate, with the same finish as the CS switch range.
Factory-direct pricing with flexible MOQ for distributors stocking dimmers alongside rocker switches.
Account management and priority production for partners supplying complete room sets in one finish.
Tell us the lamps and the total wattage and we confirm the dimmer suits before quoting. SAA documentation ships with the consignment.
Contact Our Sales TeamWith dimmable ones, yes. Non-dimmable LEDs will flicker, buzz or drop out, and that is the lamp rather than the dimmer. Check the lamp specification first.
It is the maximum load the dimmer will carry. Add up the wattage of every lamp on the circuit. If the total is close to 400W, consider splitting the circuit rather than running at the limit.
No. A fan motor needs a fan controller. A lighting dimmer on a fan usually causes hum and can overheat the motor or the dimmer itself.
|
High-Quality Material
|
The CS328/CS329 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS328/CS329 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS328/CS329 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS328/CS329 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
