

The blank plate covers a wall box that has no device in it. It exists so the wall stays flat and the finish stays consistent when a position is no longer used.
The same brushed aluminium, the same three anodised finishes, the same 121 by 80 mm footprint. On a wall of CS plates, a blank is invisible until you look for it.
A position that moved, a cable that was abandoned, a spare box left for a future device, a data or TV point that was planned and never fitted.
The plate is a cover only. It carries no terminals and no rating, and it does not make a box safe if live cables are still inside.
| Parameter | Details |
|---|---|
| Product | Blank cover plate, brushed aluminium, 121 × 80 mm |
| Function | Covers an unused wall box, no device and no terminals |
| Panel Material | Brushed aluminium plate |
| Surface Finish | Hairline brushed, anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Model | Configuration |
|---|---|
| CS327 | blank plate, 121 x 80 mm, horizontal |
| CS327-V | blank plate, vertical plate, project basis |
| CS302 | 1 gang switch, same footprint |
| CS313 | single power point, same footprint |
A blank plate is ordered with the plates around it, not later. A blank from a separate anodising batch is the one plate on the wall that will not match anything.
The devices that share this footprint are CS302 and CS313. Everything in the plate system is listed on the CS series page.
Every renovation leaves positions behind. A switch that moved to the other side of the door. A TV point that was planned and never used. A cable that was abandoned inside the wall. The blank plate is how the wall stays flat afterwards.
The CS327 is a brushed aluminium cover on the standard 121 by 80 mm footprint. No terminals, no mechanism, no rating. It covers, and that is all it does.
In a metal finish the blank matters more than in plastic. A wall of anodised plates with one plastic blank in the middle reads as unfinished, and the blank is usually the cheapest part of the job.

If the box is staying and the cable is dead, a blank plate is the quick answer. It takes a minute, costs little and can be removed when the position is used again.
If the position is gone for good and the wall is being finished anyway, patching gives a cleaner result. It costs plaster, paint and a colour match, and it is permanent.
The blank is the plate most likely to be ordered late, and that is exactly how it ends up a different shade. Anodising runs in batches, so a blank ordered six months after the switches can sit a shade off.
Order blanks with the room’s other plates, plus a couple spare. They cost little and they remove the batch question for the life of the fit-out.
Blank plates are cut and brushed from the same sheet as the rest of an order, so they carry the same grain direction and the same anodising batch as the devices beside them.
For OEM orders the face can be laser marked and the plate packed with the rest of the room set, which is the simplest way to keep a fit-out consistent.
Blanks are cheap, and they are also the part most often forgotten until handover.
Custom anodised colours, laser marking and retail packaging on the blank plate, with the same finish as the CS switch and socket range.
Factory-direct pricing with flexible MOQ for distributors stocking blanks alongside devices.
Account management and priority production for partners supplying complete room sets in one finish.
Order them with the room set so they come from one anodising batch. Tell us the count and the finish and we quote factory-direct with a plate sample.
Contact Our Sales TeamNo. It covers the box. If there are live conductors inside, the box still has to be accessible and properly terminated, and an electrician decides how. The plate is a cover, not a safety device.
Yes, as a project item. The standard catalogue blank is the 121 by 80 mm horizontal plate, which covers the same box. Tell us the orientation you need at the order stage.
It probably came from a different anodising batch than the devices around it. Blanks are often ordered late, after handover issues turn up. Order them with the room set and the difference disappears.
On the day, yes, by a wide margin. Over the life of the fit-out it depends. A blank is reversible and can become a device again. A patched wall is permanent and needs to be opened if the position comes back.
|
High-Quality Material
|
The CS327 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS327 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS327 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS327 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
