

The vertical two gang plate puts the mechanisms one above the other on an 80 mm face. That is the difference a narrow wall requires: the same two circuits, arranged along the dimension the wall actually has.
This is the plate for a joinery return, a cabinet side panel, a slim pier or a bulkhead end, where two circuits need to terminate and 121 mm is not available. Common in kitchens with a tall cabinet run and in bathrooms with a nib wall.
Stacking changes which switch a person reaches first. The upper gang sits closer to standing eye level and the lower one closer to a seated reach, so the circuit used most often belongs on top. It is a small decision that clients notice in use.
The screws allow it. The finish does not. The plate is brushed along its length, so turning it lays the grain across the face, which is the one thing a brushed plate is meant to avoid.
If you need a horizontal plate, order the horizontal model. They are separate part numbers for that reason, and mixing them on one wall shows.
| Parameter | Details |
|---|---|
| Product | Australian standard 2 gang wall switch, vertical brushed aluminium plate |
| Switching Function | 2 way (SPDT) per gang; either gang available as 1 way, intermediate or double pole |
| Rated Current | 10A per gang; 16A on request |
| Rated Voltage | AC250V |
| Number of Gangs | 2 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS303-V | 2 gang, 1 way, 10A, vertical |
| CS304-V | 2 gang, 2 way, 10A, vertical |
| CS304-V/16A | 2 gang, 2 way, 16A, vertical |
| CS304-VDP | 2 gang, double pole, 10A, vertical |
Two gangs stacked can carry different functions, for example a two way gang at the top and an intermediate gang below. State the function per position, not just per plate.
Where the wall does allow 121 mm, the same two circuits fit the horizontal plate as CS304. The full vertical range is on the CS series page.

A joinery return or a cabinet side panel is a common place to need two lighting circuits and an uncommon place to have 121 mm of clear width. The vertical two gang plate solves it by stacking the mechanisms on an 80 mm face.
Both gangs are independent two way mechanisms rated 10A at 250V, with the option of intermediate or double pole on either position. Terminals take back and side cable entry, and the mechanism is shared with the horizontal range.
The arrangement matters more than it sounds. Stacked switches are read top to bottom, and the top gang is the one at standing eye height. Put the everyday circuit there and the occasional one below, and the plate stops being a compromise and starts being a plan.
On a vertical plate the top gang is reached first by an adult standing, and the lower gang by a child or a seated user. In a bathroom, that usually means mirror light on top and ceiling light below; in a kitchen, task lighting above and the general circuit below.
Getting this wrong is not a fault, it is a permanent annoyance. Changing it later means swapping the mechanisms or rewiring, so it is worth one question at the design stage rather than a callback.
A stacked plate has the same failure mode as any multi-gang plate, one gang working, the other not, discovered at handover, so both gangs are function tested independently on the finished plate.
Vertical plates are brushed along the long axis and inspected for grain and colour before assembly. OEM orders can carry laser marking on the metal face and retail packaging, with vertical and horizontal plates shipped in one consignment.
Joinery returns in kitchens and laundries, nib walls in bathrooms, and the end panel of a wardrobe run.
In each case the electrician has a circuit to land and a wall that will not take a horizontal plate, and the vertical two gang is the part that resolves it without moving the circuit.
It also appears in apartments where the entry wall is a narrow pier beside the door. Two circuits, hall and living, on one vertical plate is a tidier specification than two plates at different heights.
The order decision is the stacking order and the function per position, not the finish.
Custom anodised colours, laser marking and retail packaging on the vertical two gang platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors stocking vertical plates for joinery and apartment work.
Account management, Australian datasheets and priority production for partners building a full metal range.
Tell us the clear width and which circuit belongs on top, and we confirm the plate before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with the consignment.
Contact Our Sales TeamThe one used most often by a standing adult, because the upper position is closer to standing eye and hand height. In a bathroom that is usually the mirror light; in a kitchen it is the task lighting over the bench. The lower gang falls naturally to a seated or child reach.
Slightly more in product, less in installation. Two singles need two boxes and two cut-outs in a pier that may only have room for one, and they break the brushed grain across the pair. On a narrow return the single plate usually wins on both cost and appearance.
Yes. Each gang is an independent mechanism, so two breakers is normal. Confirm it at the quotation stage because it changes the internal linking, and tell the electrician which gang is which so the top position ends up on the intended circuit.
|
High-Quality Material
|
The CS304-V/CS303-V/CS304DP-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS304-V/CS303-V/CS304DP-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS304-V/CS303-V/CS304DP-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS304-V/CS303-V/CS304DP-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
