

The vertical four gang plate arranges four mechanisms along the 121 mm height on an 80 mm face. It is the counterpoint to the horizontal four gang: same circuit count, opposite geometry.
On a horizontal plate the circuits read left to right; on a vertical plate they read top to bottom. That changes which gang an electrician naturally wires first and which one an occupant reaches first, so the circuit order has to be agreed rather than assumed.
Four mechanisms on 121 mm leaves even margins at both ends, which is what keeps a tall plate from looking crowded. The spacing is set on a jig rather than by eye.
Two vertical two gang plates are easier to fit and easier to read than one plate of four, but they need two cut-outs in a wall that may only have room for one. The four gang exists for the narrow case.
| Parameter | Details |
|---|---|
| Product | Australian standard 4 gang wall switch, vertical brushed aluminium plate |
| Switching Function | 2 way (SPDT) per gang; individual gangs available as 1 way, intermediate or double pole |
| Rated Current | 10A per gang |
| Rated Voltage | AC250V |
| Number of Gangs | 4 gang |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy contacts on T2 copper conductor |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS307-V | 4 gang, 1 way, 10A, vertical |
| CS308-V | 4 gang, 2 way, 10A, vertical |
| CS308-VDP | 4 gang, double pole, 10A, vertical |
| CS308-V/005 | 4 gang, intermediate, 10A, vertical |
A vertical four gang plate is assembled per position. State the function and the circuit for each of the four, top to bottom, when you enquire.
If the wall has width, the horizontal four gang is CS308. Vertical and horizontal plates are both listed on the CS series page.
Turning a four gang plate vertical is not a rotation. The circuits that read left to right on a horizontal plate read top to bottom on a vertical one, and that changes which gang is reached first, which one is wired first, and how the plate is labelled.
The CS308-V carries four independent two way mechanisms at 10A on an 80 mm by 121 mm brushed aluminium face. Any position can be built as intermediate or double pole, and the terminals take back and side cable entry.
It exists for walls that offer height and refuse width: the pier beside a stair, a nib wall in a hallway, the return at the end of a joinery run. Where width exists, the horizontal four gang is easier to read; where it does not, this is the same product rearranged.

On a horizontal plate an electrician tends to wire left to right in the order the circuits appear on the drawing. On a vertical plate the same habit produces a different result, because the first gang wired is now the top one and the last is at the bottom.
That is worth stating on the drawing rather than leaving to habit. A four gang plate where the store room ended up at eye height and the main light at knee height is a minor fault that the client will live with for years.
Four mechanisms stacked means the screw load is concentrated at the ends of a 121 mm plate. Over-tightening bows the face and shows as a line of reflection down one edge, which on a brushed surface is more visible than the equivalent error on a horizontal plate.
The plate is also tall enough that a box set out of square shows as a taper along one side. Check the box with a spirit level before the second fix, not after.
Four mechanisms on a 121 mm face are assembled on a fixed jig so the spacing is even, then tested gang by gang on the finished plate. The plate is checked against a straight edge before packing, because a tall aluminium face shows any bow.
Vertical plates are brushed along the long axis and inspected for colour before assembly. OEM orders can be laser marked and packed to your retail specification, with mixed orientations in one consignment.
Two numbers decide this plate: the clear width, and the circuit order top to bottom.
Custom anodised colours, laser marking and retail packaging on the vertical four gang platform, with SAA documents for the certified range.
Factory-direct pricing for project quantities, with scheduled delivery and mixed orientations in one consignment.
Account management, Australian datasheets and priority production for partners supplying narrow-wall projects.
Send the clear width and the circuit order, and we confirm the plate and the stacking before quoting. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with the consignment.
Contact Our Sales TeamIt changes which gang an electrician reaches first, and therefore which circuit tends to end up where if the order is not stated. Put the circuit order on the drawing as top, second, third, fourth and the wiring follows it without discussion on site.
Slightly. A 121 mm tall aluminium plate shows a box that is out of square as a taper along one edge, and the screw load is concentrated at the ends, so over-tightening bows it. Level the box and seat the plate without forcing it and the difference disappears.
Yes. Each position is assembled to the function you specify, and the plate carries one part number with the mix noted on the order. State the function per position rather than a total, because the mechanisms look identical and only the terminals differ.
If the wall has room for two boxes, two plates are easier to fit and easier to read. The four gang plate exists for the case where the pier takes one box, which is the common reason a four gang is specified at all.
|
High-Quality Material
|
The CS308-V/CS307-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS308-V/CS307-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS308-V/CS307-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS308-V/CS307-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products
Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.
Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.
Our Core Values:

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.
