


Two USB ports sit beside the 10A outlet on the same brushed aluminium plate, so a bedside or desk position charges a phone without a plug pack. The ports share 2A, which is a charger for overnight use rather than a fast charger.
A USB power point is usually specified where the socket is visible and touched daily: bedside, desk, hotel guest room. That is exactly where a moulded plastic plate looks out of place, and where a brushed aluminium face earns its cost.
The two ports share 2A total, so a phone and a watch charge fine while two tablets will each charge slowly.
That is a design decision rather than a limitation: shared 2A keeps the module small enough to fit the standard plate depth, which is what allows the plate to stay 121 × 80 mm.
The 240V outlet is the standard Australian 10A three pin configuration with a child shutter, certified to AS/NZS 3112. Nothing about the charging module changes the outlet rating, so the plate is specified the same way as a plain single power point.
| Parameter | Details |
|---|---|
| Product | Australian standard 1 gang power point with dual USB charger, brushed aluminium plate |
| Outlet Type | 10A, 3 pin, AS/NZS 3112 configuration, with child shutter |
| Rated Current | 10A |
| Rated Voltage | AC250V |
| USB Output | 2 ports, 5V DC, 2A shared total |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS313 | 1 gang, 10A, horizontal |
| CS313-USB | 1 gang, 10A, with 2 x USB (2A shared) |
| CS313-A+C | 1 gang, 10A, with USB-A and USB-C |
| CS314 | 1 gang, 10A, with extra switch |
| CS313-V | 1 gang, 10A, vertical plate |
The USB variants share the same plate and the same cut-out as the plain single power point, so a room can mix charging and non-charging positions without changing the wall box or the plate size.
The other single outlet variants, including the switched and USB-C versions, are listed on the CS series page. For a narrow pier or a bedside return, the vertical version is CS313-V-USB.
A USB power point is a small convenience that becomes a specification issue the moment the wall is metal.
The module has to fit inside a standard plate depth, the ports have to sit somewhere that does not fight the outlet, and the face has to match every other plate in the room.
The CS313-USB is the version we build for that case.
Two USB ports share 2A and sit beside a standard 10A Australian outlet. The outlet keeps its child shutter and its AS/NZS 3112 certification; the charging module is separate and does not change the outlet rating. Terminals take back and side cable entry, so the wiring method is unchanged.
The 2A shared budget is deliberate. A higher output needs a larger module and a deeper plate, which breaks the standard cut-out and forces a different box.
For overnight bedside charging, 2A is enough; for a laptop, it is not, and we would rather say so than quote a number the plate cannot deliver.

Bedside is the obvious one, and it is where the product performs best: one outlet for a lamp, two USB ports for a phone and a watch, all on one plate instead of a plug pack fighting for space.
Hotel guest rooms are the same application at scale, with the added benefit that a guest cannot unplug the charger and walk off with it.
Desk and study positions are the second, though with a caveat: a laptop will not charge from a shared 2A port, so a desk position usually needs the outlet for the laptop supply and the USB ports for peripherals.
The reason a USB plate works at all is that the charging module is a separate board behind the outlet, not a replacement for it. That keeps the plate at the standard 121 × 80 mm and keeps the box depth within what an electrician expects.
It also means the module is the part that will fail first. USB charger boards age faster than socket contacts, and a failed module takes the ports out while the outlet keeps working.
On a project, that is a service call rather than a safety issue, worth knowing before you specify fifty of them.
Every CS313-USB is assembled and tested as a unit: outlet continuity, shutter operation, USB output under load, and insulation between the module and the metal plate. The plate is inspected for colour and grain before assembly, because a plate that is a shade out cannot be corrected afterwards.
For OEM orders we laser mark the face, pack to your retail specification, and can supply a project consignment mixing plain, USB and USB-C plates in one finish so the wall stays consistent.
A USB plate is ordered like a plain outlet, with one extra decision: how much charging output the position needs.
Custom anodised colours, laser marking and retail packaging on the USB power point platform, with SAA documents for the certified range.
Factory-direct pricing with flexible MOQ for distributors supplying hotel, serviced apartment and residential projects.
Account management, Australian datasheets and priority production for partners building a coordinated metal range.
Tell us the position and what will be charged there, and we will confirm whether 2A shared or the USB-C variant is the right part. Factory-direct pricing is quoted per order; SAA documentation under AS/NZS 3112 ships with every consignment.
Contact Our Sales TeamTwo amps shared across both ports, at 5V. One device can draw most of that; two devices split it. It is enough for phones, watches, earbuds and tablets on a slow charge, and not enough for a laptop or a fast-charge phone that expects 3A or a higher voltage.
No. The module and the plate are assembled as one unit, so a failed module means replacing the plate.
That is a deliberate trade: it keeps the assembly thin enough for a standard box and avoids a serviceable joint behind a metal face. For projects, hold a small number of spare plates rather than spare modules.
It needs the standard depth for an Australian power point plus the thickness of the charging module, which is designed to fit within normal clearance. Very shallow boxes or boxes crowded with cable are the usual cause of a tight fit, so confirm depth at first fix rather than at installation.
The charging module is fed from the same supply as the outlet, so if the circuit is isolated at the switch or the breaker, the ports are off too. On a switched plate the switch controls both.
If you need charging to remain live while the outlet is isolated, that is a wiring arrangement to discuss with your electrician, not a product variant.
|
High-Quality Material
|
The CS313-USB features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS313-USB switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS313-USB switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS313-USB guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
