CS315 Brushed Aluminium Double Power Point | 10A SAA

Category:CS SERIES
Model No.:
CS Series
Material:
Aluminum plate
Current:
10A
Voltage:
250V
Standard:
AU Standard
Dimension:
121mm*80mm
Authentication:
SAA, ISO9001, ISO14001
Quality Guarantee
 
DESCRIPTION FEATURES COMPANY

Key Features & Typical Use

Two Outlets on One Metal Face

The standard Australian double power point, on a brushed aluminium plate. Two 10A three pin outlets with child shutters, side by side on the 121 × 80 mm format, which is the plate most rooms end up needing.

The Plate That Sets the Finish for a Room

Double power points outnumber switches in most rooms, so this is the plate that determines whether a metal finish reads as consistent. One double in a different anodising batch is more visible than a switch out of place.

Both Outlets Fully Rated

Each outlet is 10A at 250V, certified to AS/NZS 3112. Two appliances can run simultaneously within the circuit rating; the plate does not split a single outlet between two positions.

Where Double Beats Two Singles

A double power point costs little more than a single and saves a cut-out, a plate and an alignment. On a brushed face the alignment is the argument that decides it: two single plates are rarely level with each other.

Specifications

ParameterDetails
Product Australian standard 2 gang power point, brushed aluminium plate
Outlet Type 2 x 10A, 3 pin, AS/NZS 3112 configuration, with child shutters
Rated Current 10A per outlet
Rated Voltage AC250V
Configuration Two outlets, unswitched
Terminals Screw terminals, back and side cable entry
Contact Material QSn6.5-0.1 tin phosphor bronze socket contacts
Panel Material Brushed aluminium plate, 121 × 80 mm
Surface Finish Hairline brushed; anodised colour layer
Available Colours Silver white, matte black, silver grey from stock; custom RAL on request
Mounting Standard Australian wall box, horizontal or vertical
Protection Degree IP20, indoor use
Standard AS/NZS 3112
Approval SAA
Warranty 15 years (IGOTO standard warranty)

CS Series Double Power Point Models

ModelConfiguration
CS315 2 gang, 10A, unswitched, horizontal
CS315-USB 2 gang, 10A, with 2 x USB-A
CS315-A+C 2 gang, 10A, with USB-A and USB-C
CS316 2 gang, 10A, with extra switch
CS315-V 2 gang, 10A, vertical plate

All double power point variants share the same plate and cut-out, so a room can mix plain, USB and switched versions without changing the wall box.

Every double outlet variant is listed on the CS series page. Where the same two outlets have to sit on a narrow section, the vertical double is CS315-V.

The Double Power Point That Sets the Finish for the Room

In most rooms there are more power points than switches, and the double is the one that appears twice or three times on the same wall. That makes it the plate that decides whether a metal finish looks consistent or looks like two batches.

The CS315 carries two 10A Australian outlets with child shutters on a 121 × 80 mm brushed aluminium plate. Both outlets are fully rated at 250V and certified to AS/NZS 3112, and the terminals take back and side cable entry.

Because the plate is the most repeated item in the room, it is also the one to order first and in one batch. Switches can be added later from a different anodising run without much being noticed; a double power point that is a shade out will be seen every day.

CS315 brushed aluminium double power point, Australian standard plate

How Many Doubles Does a Room Actually Need?

Australian standard switch and socket series on brushed aluminium plates

The rule that survives contact with clients is one double per wall in a living room, one per bench run in a kitchen, and one either side of a bed.

It is not a standard, it is a starting point, and it is usually short in a kitchen once small appliances are counted.

The cost of adding a double at first fix is small. The cost of adding one after the wall is finished is a patch, a paint and a conversation. On a metal finish it also risks a plate from a different anodising batch, which is the part nobody budgets for.

Metal Double Plates and the Batch Problem

Anodising is a batch process, and a double power point is the plate most likely to be compared across a room because there are several of them. Two doubles from different batches on the same wall will read as different colours under a window, even though both are nominally silver grey.

The fix is ordering practice rather than product: one order, one batch, and extras ordered at the same time. Ordering a top-up six months later is the usual way a room ends up with a plate that does not match.

IGOTO switch and socket factory, assembly and testing lines in Yueqing

Factory-Direct OEM / ODM Manufacturer

Double Plates Built and Tested as One Unit

Both outlets are tested on the finished plate: continuity, shutter operation and polarity. Testing the plate rather than the outlet modules catches the fault that matters on a double, one outlet working, the other not, and nobody noticing until handover.

Plates are cut and brushed per order, inspected for grain and colour before assembly, and packed with an interleaf to protect the face. OEM orders can carry laser marking and retail packaging.

  • OEM branding, laser marking on the metal face, custom anodised colours and retail packaging.
  • ODM options, plain, USB, USB-C or switched configuration on the same plate.
  • Testing, both outlets tested on the finished plate, shutters checked per unit.
  • MOQ, flexible wholesale quantities with mixed variants in one carton.

Buying Guide

Doubles are the volume item, so the order is mostly about quantity and batch rather than configuration.

  1. Count positions per room, not per house.
  2. Confirm 10A or 15A for any appliance outlet.
  3. Approve a physical plate sample in the finish.
  4. Order spares with the main consignment, not later.
  5. Confirm the box type suits the 121 x 80 mm plate.
  6. Production with both outlets tested per plate.
  7. Dispatch from Yueqing, interleaved and carton-packed.
CS315 brushed aluminium double power point, Australian standard plate

How We Support Your Business

OEM customization of brushed aluminium switch plates, panel colours and laser marking

OEM / ODM

Learn more →

Custom anodised colours, laser marking and retail packaging on the double power point platform, with SAA documents for the certified range.


Anodised colours · Laser marking · SAA documents
Brushed aluminium switches and sockets installed in an Australian residential project

Wholesale

Learn more →

Factory-direct pricing with flexible MOQ and scheduled delivery for distributors stocking doubles as a core line.


Factory pricing · Flexible MOQ · Global shipping
Function and endurance testing of Australian standard switches in the IGOTO laboratory

Distributor Support

Learn more →

Account management, Australian datasheets and priority production for partners supplying residential and commercial fit-outs.


Account manager · Technical docs · Priority lead times

Stocking or Specifying Double Power Points?

Tell us the finish, the quantity and the box type, and we quote factory-direct with a plate sample before production. SAA documentation under AS/NZS 3112 ships with every consignment; spares can be ordered with the main batch to keep the finish consistent.

Contact Our Sales Team

Frequently Asked Questions

Are both outlets on the same circuit?

Yes. A double power point is one plate on one supply, so both outlets share the circuit. That is fine for normal domestic loads, but two high-draw appliances on one double will load that circuit, and the answer is a second circuit rather than a different plate.

Can one outlet be 10A and the other 15A?

Not on the standard double. Both outlets are the same rating because they share the plate and the internal linking. If you need a 15A outlet, specify a single 15A power point alongside the double rather than trying to combine them on one plate.

Why do my double power points look slightly different in colour?

Because they came from different anodising batches. Aluminium colour is a tolerance, not an absolute, and the effect is most visible on the plates you have several of. Order all doubles for a room, plus spares, in one consignment and the problem disappears.

Is a double cheaper than two singles?

Slightly more in product, considerably less in labour and finishing. One cut-out instead of two, one plate to level, one box. On a brushed face the alignment alone usually decides it, because two single plates side by side are rarely perfectly level.

High-Quality Material
The CS315/CS337 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
Long Life Cycle
Designed for durability, the CS315/CS337 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
Enhanced Conductivity
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
Versatile Design
The sleek, modern design of the CS315/CS337 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
High Safety Standards
With SAA certification and compliance with ISO9001 and ISO14001, the CS315/CS337 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.

IGOTO – A Trusted Manufacturer of High-Quality Electrical Products

Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia.

Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.

 

Our Core Values:

  1. Reliability: We provide long-lasting products with a 15-year warranty, backed by comprehensive technical support.
  2. Innovation: We offer customized solutions, including logo and packaging design, to meet the specific needs of our B2B clients.
  3. Global Reach: We serve clients across multiple regions, including Australia, South America, Southeast Asia, and Europe, with a strong focus on expanding our presence in key markets.
  4. Certifications: Our products are certified to SAA, ISO9001, and ISO14001, ensuring they meet international standards for quality and environmental management.

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions.

More About IGOTO >>

GET A CONTACT
Tell Us Your Requirements
YOUR NAME
COUNTRY
COMPANY
YOUR EMAIL
YOUR PHONE
YOUR MESSAGE