

The plate joins one HDMI lead to another. It does not change the signal, boost it or convert it. Two short leads either side of a passive coupler is what the wall is doing.
The usual position is behind a television on a bracket, where the screen hides the cable run and only the plate is visible when the screen comes off.
Passive HDMI over long in-wall runs is where most installations fail. Confirm the cable version and the total length before ordering, not after the wall is closed.
A brushed aluminium plate behind a screen reads with the bracket and the bezel. It is a small detail in a position that is otherwise all cable.
| Parameter | Details |
|---|---|
| Product | HDMI wall socket, brushed aluminium plate |
| Function | Passive HDMI coupler, female to female |
| Connector | HDMI type A at the face, both sides |
| Plate Size | 121 × 80 mm |
| Note | Signal support depends on cable version and total run length, confirmed per project |
| Panel Material | Brushed aluminium plate, 121 × 80 mm |
| Surface Finish | Hairline brushed, anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box |
| Plate Standard | AS/NZS 3112 plate system |
| Approval | SAA documentation supplied per order |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS330 | HDMI wall socket, passive coupler |
| CS320 | TV aerial socket |
| CS323 | telephone or CAT6 data socket |
| CS322 | TV plus telephone or data |
HDMI plates are often ordered with a data and a power plate for the same screen position. Order them together so the finish matches.
The other signal plates for the same screen position are CS320 for aerial and CS323 for data. All are listed on the CS brushed aluminium series page.
A wall-mounted television hides a lot. The bracket, the cables, the wall box. What it does not hide is the plate the cables come out of, which is visible every time the screen is taken down.
The CS330 is a passive HDMI coupler on a brushed aluminium plate. One lead from the source, one lead to the screen, joined inside the wall.
It does not improve the signal and cannot rescue a marginal cable. What it does is turn a cable hanging out of a hole into a proper termination point.

Long passive runs are the usual failure. HDMI over ten metres through a coupler and two plugs is asking a lot, and 4K makes it worse. The picture drops out, or the screen negotiates a lower resolution and the client thinks the television is faulty.
Before ordering, confirm the total length end to end, including the two short leads either side. If the run is long or the resolution is high, the answer is an active cable or a different transmission method, not a better plate.
A brush plate lets the cable pass through without a connector in the middle. That removes one connection and one point of loss, and it allows an active cable to run unbroken from source to screen.
An HDMI plate looks neater and gives a proper socket at the wall. For a short run at 1080p, that is the better trade. For a long 4K run, the brush plate often wins on performance.
Each plate is assembled and checked for connector seating before packing, then interleaved so the face arrives unmarked. Plates come from one sheet per order so the wall stays consistent.
For OEM orders the face can be laser marked, and a screen position can ship as one set with HDMI, data and power plates in the same finish.
Distance decides whether this plate is the right part at all.
Custom anodised colours, laser marking and retail packaging on the HDMI and signal plate range.
Factory-direct pricing with flexible MOQ for distributors stocking media wall plates.
Account management and priority production for partners supplying full media wall sets.
Send the run length and the resolution and we confirm whether a passive plate is suitable before quoting. Order it with the screen position’s other plates in one finish.
Contact Our Sales TeamThe plate is a passive coupler, so support depends on the cable and the length. Short runs with a suitable cable will pass 4K. Long passive runs often will not, whatever plate is used.
An active cable has a source end and a display end. Adding a coupler in the middle can stop it working. If the installation needs an active cable, a brush plate that lets the cable run unbroken is usually the safer choice.
There is no fixed number, because cable quality and resolution both matter. As a rule, keep passive runs short and treat anything approaching ten metres as a case for an active solution. Confirm with the cable supplier.
No. The plate is passive and carries no supply. It is a connector, not a device.
|
High-Quality Material
|
The CS330 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS330 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS330 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS330 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
