

The vertical plate puts the push button on an 80 mm wide face, for the pier beside a door or a return where 121 mm will not fit.
The mechanism is available at 10A for lighting and 16A where the circuit needs it. Both use the same plate and the same cut-out.
On a narrow plate the button sits at a comfortable height more easily than a horizontal plate crowded by a frame. That is the practical reason it appears beside bathroom doors.
Identical internals, different plate and fixing centres. A project can mix both orientations with one set of spares.
| Parameter | Details |
|---|---|
| Product | Australian standard push button switch, vertical brushed aluminium plate |
| Actuator | Push button, press action |
| Rated Current | 10A or 16A |
| Rated Voltage | AC250V |
| Plate Size | 80 × 121 mm |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Panel Material | Brushed aluminium plate, 80 × 121 mm |
| Surface Finish | Hairline brushed; anodised colour layer |
| Available Colours | Silver white, matte black, silver grey from stock; custom RAL on request |
| Mounting | Standard Australian wall box, horizontal or vertical |
| Protection Degree | IP20, indoor use |
| Standard | AS/NZS 3112 |
| Approval | SAA |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| CS515-V | push button, 10A or 16A, vertical |
| CS515 | push button, 10A, horizontal |
| CS302-V | rocker switch, 1 gang, vertical |
| CS313-V | single power point, vertical |
The vertical button shares the plate and cut-out with the vertical rocker and outlet, so one narrow wall can carry all three in the same finish.
The horizontal version is CS515, and the vertical rocker is CS302-V. Both are on the CS series page.
The wall beside a bathroom door is often a narrow pier. There is room for a plate, there is a reason to want a button rather than a rocker, and there is not 121 mm of clear width.
The CS515-V puts the push button on an 80 by 121 mm brushed aluminium face at 10A or 16A. Same mechanism as the horizontal version, same terminals, same certification.
The narrow face also puts the button where a hand arrives without hunting. On a pier beside a door frame, the plate is at the edge of the opening rather than behind the door swing, which is where a wide plate sometimes ends up.

Bathroom doors are where hands are least free. A push button takes a flat hand or a forearm. A rocker wants a fingertip, and in a wet room that is not always available.
The same logic applies in aged care and in any accessible bathroom. The button is not a style choice there, it is the difference between the light working first time and the occupant trying twice.
Yes. The vertical plate is 80 mm wide, which is what the pier beside a bathroom door usually offers. The button mechanism is the same as the horizontal version.
Check the architrave as well as the wall. A plate that fits the pier but crowds the door trim never looks right, even when it is installed correctly.
The vertical plate takes the standard box, so the first fix does not change. What changes is the margin either side of the button, which is smaller than on a horizontal plate.
Set the box square and flush. An 80 mm plate that is 2 mm out of level shows it, and a button that sits visibly off centre looks like a mistake rather than a detail.
Two numbers decide this plate: the clear width on the pier, and the rating the circuit needs.
Custom anodised colours, laser marking and retail packaging on the vertical push button platform, with SAA documents for the certified range.
Factory-direct pricing with room-block quantities for accessible and hospitality fit-outs.
Account management, Australian datasheets and priority production for partners building a full metal range.
Send the clear width and the rating, and we confirm the plate fits before quoting. SAA documentation under AS/NZS 3112 ships with the consignment.
Contact Our Sales TeamYes, on the same 80 by 121 mm plate and the same cut-out. State the rating at order stage, because the mechanism is assembled into the plate and cannot be swapped afterwards.
Yes. The plates are the same size and finish, so a corridor can carry buttons at the bathroom doors and rockers elsewhere without the wall looking patched. Order them together so the anodising batch matches.
80 mm for the plate, so plan on 90 mm clear between the architrave and a corner. Below that the plate will fit but will not sit flat against the trim.
The standard version is a single pole push button. If the position needs two way control, that is a different mechanism and should be confirmed at the order stage rather than assumed.
|
High-Quality Material
|
The CS515-V/CS515-16A-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the CS515-V/CS515-16A-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the CS515-V/CS515-16A-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the CS515-V/CS515-16A-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
