Five mechanisms in a vertical stack on the 80 × 121 mm face. It is the narrowest way to get five lighting circuits to one position without a second plate.
Large open-plan living, a commercial tenancy with five zones, a function room. The count is a schedule decision, and the vertical face only matters when the wall cannot give 121 mm.
Five rockers cover about 105 mm of plate height. Set at 1000 mm to centre, the bottom rocker sits near 950 mm — clear of a bench, but close to a knee space under a desk return.
The switch inside is the FS310 mechanism. Only the face changes, so the electrical design, the certification and the spare parts are shared with the horizontal five gang.
| Parameter | Details |
|---|---|
| Product | FS310-V — Australian standard 5 gang wall switch, vertical plate |
| Switching Function | 2-way (SPDT) per gang, each usable as 1-way |
| Rated Current | 10A / 16A (FS309-V), depending on mechanism |
| Rated Voltage | AC250V |
| Gangs | 5 gang, stacked vertically |
| Plate Format | 80 × 121 mm vertical, acrylic face on PC carrier |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy on T2 copper conductor |
| Colours | White, black, champagne, green; custom RAL on request |
| Mounting | Standard Australian wall box, vertical plate |
| Mechanical Endurance | ≥ 40,000 operations per gang |
| Protection / Standard | IP20 indoor use · AS/NZS 3112 · SAA approval |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| FS310-V | 5 gang 2 way switch, 10A, vertical plate |
| FS309-V | 5 gang 2 way switch, 16A, vertical plate |
Both models share the face, the box and the mounting. The horizontal five gang plate is on the FS series page.
Five gang plates are specified against a lighting schedule, and schedules rarely care how wide the wall is. The vertical version exists because the wall does.
FS310-V holds five two way gangs in a 121 mm tall strip. In a commercial fit-out that is often the only way to keep a five-zone control point beside the entry door instead of on the corridor side of it.
Five is a stopping point. Six is the maximum in the FS range, so five leaves one position spare in the box without leaving a blank on the face — which is why schedules land here.
On the vertical face the difference between five and six is 15 mm of rocker pitch, not plate size. Both are 121 mm tall, so the decision is about whether the sixth circuit exists, not about space.
Five two way gangs is the point where box depth stops being a detail. Five switched actives, a feed, an earth and up to five strapper pairs will not fit comfortably in a shallow box, and the cable bend radius at the back of a narrow plate is tighter than on a horizontal one.
Specify the box with the cable count, not the gang count, and keep cable entry at the back. Side entry on an 80 mm plate uses clearance the plate does not have.
FS310-V is built alongside the horizontal five gang plate and tested gang by gang after the face is fitted. There is no shortcut at this gang count — a single binding rocker means the plate comes back.
Project orders are packed colour-sorted so a staged handover does not mix plates between floors.
Five gang orders come from schedules, so the work is in confirming the schedule rather than the product.
Custom faces and laser marking on the five gang vertical plate, with colour matched across a floor plate.
Factory pricing on schedule quantities, packed by floor or by apartment so installation follows the program.
Support on box sizing and cable count, plus datasheets for both plate faces for the project file.
Send the schedule quantities, the rating per circuit and the colour, and we quote the vertical five gang plate factory-direct with SAA documentation under AS/NZS 3112. Schedule orders are packed and priced per stage.
Contact Our Sales TeamYes, as FS309-V. It uses the same vertical face and the same box; only the mechanism rating changes. Mixed 10A and 16A gangs on one plate are possible within the mechanism range and are confirmed on the quotation.
80 mm of clear width and 121 mm of height. The width is the reason to choose it; if the wall gives 121 mm, the horizontal five gang plate is the more conventional choice and sits lower on the wall.
Yes. Laser marking on the mechanism and printed labelling are available through the OEM programme, which is common on five gang plates because the circuits are not self-evident to the user.
|
High-Quality Material
|
The FS310-V/FS309-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the FS310-V/FS309-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the FS310-V/FS309-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the FS310-V/FS309-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
No.6 Tuozhan Road, Leshang Pioneer Park,Yueqingwan Bay Harbor,Yueqing city,Zhejiang Province 
