FS313-V is the single outlet on the 80 × 121 mm face. The socket insert rotates with the plate, so the plug lead leaves the outlet sideways along the wall instead of dropping straight down.
A horizontal power point needs 121 mm of plaster. In a hallway, a pantry return or beside a fridge cavity there is often less, and the vertical face keeps the outlet where the appliance is rather than moving it to the nearest wide wall.
The same plate takes the 10A outlet or the 15A outlet for heavier appliances. The face and cut-out are identical; only the insert and the terminal rating change.
With the insert rotated, the lead runs across the wall rather than down it. That is an advantage behind a bench and a disadvantage beside a skirting, so decide from the appliance, not the plate.
| Parameter | Details |
|---|---|
| Product | FS313-V — Australian standard single power point, vertical plate |
| Configuration | 1 outlet, switched or unswitched |
| Rated Current | 10A or 15A, depending on insert |
| Rated Voltage | AC250V |
| Outlets | 1 |
| Plate Format | 80 × 121 mm vertical, acrylic face on PC carrier |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | QSn6.5-0.1 tin phosphor bronze socket contacts |
| Colours | White, black, champagne, green; custom RAL on request |
| Mounting | Standard Australian wall box, vertical plate |
| Insertion Endurance | Tested to AS/NZS 3112 requirements |
| Protection / Standard | IP20 indoor use · AS/NZS 3112 · SAA approval |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| FS313-V | 1 gang single power point, 10A, vertical plate |
| FS335-V | 1 gang single power point, 15A, vertical plate |
10A and 15A share the face and the box. Horizontal single outlets and the rest of the range are on the FS series page.
Power points are horizontal by habit, not by rule. The plate is rectangular, so the same outlet can be set vertically when the wall will not take 121 mm of face.
FS313-V is that plate. It keeps a single 10A or 15A outlet at the point where the appliance actually is, instead of pushing the outlet around a corner to the nearest wide wall.
Three places come up repeatedly: the narrow pier beside a refrigerator cavity, the return wall in a hallway where a horizontal plate would sit within 30 mm of the corner, and a joinery panel where the outlet has to land between two cabinet doors.
In each case the wall has height and no width. The outlet does not care which way the plate is turned — the insert is the same part — so the vertical face is purely a geometric solution.
A rotated insert changes where the lead goes. On a horizontal outlet the cord drops away from the wall; on the vertical plate it runs across the wall, which is tidier behind a bench and awkward where a skirting is close below.
Check the appliance lead length and the space below the plate before fixing the height. If the outlet sits above a bench with a 100 mm upstand, a sideways lead is usually the better result; beside a floor-level skirting it is usually not.
FS313-V uses the same socket insert as the horizontal single outlet, which is why the certification covers both faces. Only the plate moulding and the packing label change.
White and black stock in both faces; champagne, green and RAL to order with a colour sample approved before the run.
A vertical outlet order turns on two measurements and one appliance.
Custom faces and laser marking on the vertical single outlet, in four stock colours or a matched RAL.
Mixed vertical and horizontal outlets from one factory order, so a project keeps one colour batch across both faces.
Datasheets for both faces, technical advice on lead direction and priority production for regular partners.
Tell us 10A or 15A, switched or unswitched, the colour and the quantity, and we quote the vertical single outlet factory-direct with SAA documentation under AS/NZS 3112. Price is quoted per order.
Contact Our Sales TeamThe insert rotates with the plate, so the lead leaves the outlet to the side of the plate rather than below it. The plug still engages normally; what changes is which way the cord runs, which matters behind appliances.
Yes. Switched and unswitched versions use the same plate and the same box; the difference is the switch on the insert. Confirm which you need when ordering, because it is not visible from the face once installed.
Yes. Orientation is not restricted; the requirement is the AS/NZS 3112 outlet and SAA approval, and both faces carry the same certified insert. Check the plate height against the application, which is the part that does have practical rules.
|
High-Quality Material
|
The FS313-V/FS335-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the FS313-V/FS335-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the FS313-V/FS335-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the FS313-V/FS335-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
No.6 Tuozhan Road, Leshang Pioneer Park,Yueqingwan Bay Harbor,Yueqing city,Zhejiang Province 
