FS327 Blank Plate | Australian Wall Plate Cover

Category:FS SERIES
Model No.:
FS Series
Material:
Acrylic
Current:
Voltage:
250V
Standard:
AU Standard
Dimension:
121mm*80mm
Authentication:
SAA, ISO9001, ISO14001
Quality Guarantee
 
DESCRIPTION FEATURES COMPANY

Key Features & Typical Use

A Cover for an Unused Box

FS327 closes a wall box that has no device in it — a spare point for a future appliance, a box left after a renovation, or a circuit position held for later.

Colour Matched to the Wall

The plate uses the same acrylic face and colour range as the switches and outlets beside it, so a blank does not read as a different product line on the same wall.

Removable, Not Permanent

A blank plate keeps the box and the cable accessible. That is the difference between a spare point that can be used later and one that has been plastered over.

Screws and Cover Included

Supplied with the fixing screws and a face that covers the box opening, so the installation does not depend on finding matching hardware on site.

Specifications

Parameter Details
Product FS327 — blank plate / unloaded plate
Function Covers an unused or spare wall box
Plate Format 121 × 80 mm, acrylic face on PC carrier
Supply Plate with fixing screws
Colours White, black, champagne, green; custom RAL on request
Mounting Standard Australian wall box
Application Spare points, renovation closures, future appliance positions
Protection / Standard Indoor use · AS/NZS 3112 plate format
Warranty 15 years (IGOTO standard warranty)

FS Series Models

Model Configuration
FS327 Blank plate, horizontal

Unloaded plates for the other series share the same format. The full range is on the FS series page.

Closing a Box Without Closing It Forever

Every renovation leaves a box behind. A cable that was going to feed a wall oven, a point for a future air conditioner, a switch that moved when the door did.

FS327 covers that box in the same face and colour as the plates around it, and keeps it usable. Plastering over is cheaper once and expensive the day someone needs the cable.

FS327 blank plate, Australian standard acrylic plate

Blank Plate or Plaster Over?

Plaster over a box and the cable is gone. If the point was genuinely abandoned, that is the tidy answer. If there is any chance a future appliance, screen or outlet will need it, a blank plate is the cheaper decision by a wide margin.

The other case is a cable that is still live. A blank plate keeps it enclosed and identifiable; a plastered-over box with a live cable inside a wall is a fault that surfaces at the worst possible time.

Colour Matching Across a Wall

A blank plate is judged only on how it looks beside its neighbours. Acrylic faces vary slightly between production batches, so the reliable approach is to order the blanks with the switches and outlets for the same wall rather than adding them later.

On champagne and green finishes the difference between batches is visible in daylight. White and black are more forgiving, but ordering together is still the safer habit.

Blank plates and switch plates packed together for one colour batch

Factory-Direct OEM / ODM Manufacturer

Blanks From the Same Face Mould

FS327 is moulded on the same face family as the rest of the range, which is what makes the colour match possible. It is packed with the plates it will sit beside when the order is placed that way.

White and black from stock; champagne, green and RAL to order, ideally on the same order as the devices for that wall.

  • OEM branding — laser marking, custom panel colours, retail packaging.
  • ODM options — blank plates packed with device plates as a wall set.
  • Certification — plate system documents supplied on request.
  • MOQ — flexible wholesale quantities, mixed plates in one order.

Buying Guide

Buy blanks with the devices, not after them.

  1. Confirm the box is spare, not abandoned and live.
  2. Count blanks per wall alongside the switches and outlets.
  3. Order in the same colour batch as the devices.
  4. Confirm the box is a standard Australian size.
  5. Approve a sample against the adjacent plates before the full order.
IGOTO Australian standard wiring accessories packed for global shipping

How We Support Your Business

OEM customization of blank plates and panel colours

OEM / ODM

Learn more →

Custom faces and laser marking on blank plates, produced in the same batch as the device plates.


Panel colours · Batch matching · Documents
Blank plate beside switches and outlets on a finished wall

Wholesale

Learn more →

Factory pricing when blanks are ordered with the wall’s devices, so the colour batch is shared.


Factory pricing · Batch matching · Global shipping
Inspection of acrylic plates before packing

Distributor Support

Learn more →

Support on colour matching and batch planning, plus plate specifications for the project file.


Account manager · Colour matching · Priority lead times

Ordering Blanks for a Project?

Send the colour, the quantity and the device plates they will sit beside, and we quote FS327 factory-direct in the same batch. Ordering blanks with the devices is the only reliable way to match the finish.

Contact Our Sales Team

Frequently Asked Questions

Can a blank plate cover a live cable?

It can enclose a terminated spare point, but how that point must be left — terminated, isolated or disconnected — is a fixed wiring decision for the electrician. Do not plaster over a box that still contains a live cable.

Will a blank plate match the switches on the same wall?

Only if it comes from the same colour batch. Acrylic faces vary slightly between runs, which is visible in daylight on champagne and green. Order the blanks with the devices for that wall.

Is a blank plate the same size as a switch plate?

Yes. It uses the same 121 × 80 mm face and the same wall box, so it sits flush with the plates beside it and covers the same opening.

High-Quality Material
The FS327 features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
Long Life Cycle
Designed for durability, the FS327 switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
Enhanced Conductivity
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
Versatile Design
The sleek, modern design of the FS327 switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
High Safety Standards
With SAA certification and compliance with ISO9001 and ISO14001, the FS327 guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.

IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer.   Our Core Values:

  1. Reliability: We provide long-lasting products with a 15-year warranty, backed by comprehensive technical support.
  2. Innovation: We offer customized solutions, including logo and packaging design, to meet the specific needs of our B2B clients.
  3. Global Reach: We serve clients across multiple regions, including Australia, South America, Southeast Asia, and Europe, with a strong focus on expanding our presence in key markets.
  4. Certifications: Our products are certified to SAA, ISO9001, and ISO14001, ensuring they meet international standards for quality and environmental management.

We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>

GET A CONTACT
Tell Us Your Requirements
YOUR NAME
COUNTRY
COMPANY
YOUR EMAIL
YOUR PHONE
YOUR MESSAGE