FS515-V uses a push button actuator on the vertical face. It reads as a modern switch, suits a flat plate aesthetic, and gives a different feel under the finger than a standard rocker.
Push button plates are specified where the switch has to be obvious and easy to operate with a closed hand or a limited grip, which is why they turn up in accessible rooms and public amenities.
The same 80 × 121 mm face as the rest of the vertical range, so a push button can sit in a narrow reveal where a 121 mm horizontal plate would not fit.
Latching and momentary push button mechanisms look identical from the front and wire completely differently. Confirm which the project needs before the order, not after the electrician arrives.
| Parameter | Details |
|---|---|
| Product | FS515-V — Australian standard push button switch, vertical plate |
| Actuator | Push button, single gang |
| Rated Current | 10A / 16A, depending on mechanism |
| Rated Voltage | AC250V |
| Gangs | 1 gang |
| Plate Format | 80 × 121 mm vertical, acrylic face on PC carrier |
| Terminals | Screw terminals, back and side cable entry |
| Contact Material | AgNi15/Cu silver alloy on T2 copper conductor |
| Colours | White, black, champagne, green; custom RAL on request |
| Mounting | Standard Australian wall box, vertical plate |
| Mechanical Endurance | ≥ 40,000 operations |
| Protection / Standard | IP20 indoor use · AS/NZS 3112 · SAA approval |
| Warranty | 15 years (IGOTO standard warranty) |
| Model | Configuration |
|---|---|
| FS515-V | 1 gang push button switch, 10A, vertical plate |
| FS515-V / 16A | 1 gang push button switch, 16A mechanism, same plate |
Confirm the mechanism type (latching or momentary) on the quotation, because the two are not interchangeable on site. The rocker version is on the FS series page.
Push buttons are chosen for how they operate, not for how they look. The whole face depresses, there is no rocker edge to catch, and the action is the same whichever way the plate is turned.
FS515-V puts that mechanism on the 80 × 121 mm vertical face for door reveals and accessible rooms where a horizontal plate will not fit.
The vertical face suits this mechanism better than most, because a push button has no up or down. Rotating a rocker changes which way is on; rotating a button changes nothing about how it is used.
That makes it a clean answer for a narrow reveal where the plate has to be vertical for geometric reasons but the client wants a consistent switch across the building.
Accessible design puts controls in a band roughly 900–1100 mm above the floor, and a 121 mm tall plate has to sit entirely inside it. Centre the plate near 1000 mm and it does.
The other accessible consideration is operation force and grip. A push button can be pressed with a closed fist or an elbow, which is why it is specified in accessible bathrooms and public amenities even when a rocker would be cheaper.
FS515-V is built on the same plate as the rest of the vertical range, so a project can mix rockers and push buttons across a floor without a second face moulding or a second colour batch.
Confirm the mechanism type at the quotation stage — latching and momentary versions are produced to order and are visually identical once installed.
One question decides the order: latching or momentary.
Custom faces and laser marking on the push button plate, with the mechanism built to your specification.
Hotel and public building quantities at factory pricing, packed per room or per floor.
Support on mechanism selection and accessible mounting heights, plus datasheets for both faces.
Tell us latching or momentary, 10A or 16A, the colour and the quantity, and we quote FS515-V factory-direct with SAA documentation under AS/NZS 3112. Mechanism type is confirmed in writing before production.
Contact Our Sales TeamA latching button holds its state when pressed, so it works like a normal switch on a lighting circuit. A momentary button only makes contact while pressed and needs a relay or control system behind it. They look the same from the front.
Only the latching version, wired as a normal switch. A momentary mechanism on a standard circuit will not hold the light on, which is why the mechanism type has to be settled before ordering.
It is often chosen for them, because it can be operated with a closed hand. Check the plate sits inside the 900–1100 mm control band and confirm the requirement with the accessibility consultant for the project.
|
High-Quality Material
|
The FS515-V/FS515-16A-V features a high-quality acrylic panel that provides both elegance and fire resistance. The switch contacts are made of silver alloy (AgCd015/Cu), offering superior conductivity and longer lifespan.
|
|
Long Life Cycle
|
Designed for durability, the FS515-V/FS515-16A-V switch can withstand over 40,000 on-off operations, making it perfect for high-use environments such as offices, schools, and shopping centers.
|
|
Enhanced Conductivity
|
The T3 copper terminals and phosphor copper contacts ensure excellent electrical conductivity and strong elasticity, contributing to a reliable and consistent performance over time.
|
|
Versatile Design
|
The sleek, modern design of the FS515-V/FS515-16A-V switch makes it a versatile choice for various applications, including residential, commercial, and industrial installations.
|
|
High Safety Standards
|
With SAA certification and compliance with ISO9001 and ISO14001, the FS515-V/FS515-16A-V guarantees top-notch quality and safety. It meets all Australian safety standards, ensuring peace of mind for end-users.
|
IGOTO – A Trusted Manufacturer of High-Quality Electrical Products Founded in 1999, Zhejiang IGOTO Electric Co., Ltd. has become a leading manufacturer and supplier of electrical products, specializing in switches, sockets, and related components. With over 20 years of experience in the industry, IGOTO Electric has established itself as a trusted partner for B2B clients worldwide, including well-known companies in Australia, South America, and Southeast Asia. Our commitment to quality and innovation is backed by over 15 years of research and development, with a focus on producing electrical products that meet the highest safety and performance standards. As an OEM partner for several large global brands, we pride ourselves on delivering solutions that meet the unique needs of each customer. Our Core Values:
We are dedicated to becoming your reliable partner in providing safe, durable, and cost-effective electrical solutions. More About IGOTO >>
No.6 Tuozhan Road, Leshang Pioneer Park,Yueqingwan Bay Harbor,Yueqing city,Zhejiang Province 
